User Tools

Site Tools


MartianPrincess Base

image_medium.jpg

Product: MartianPrincess Base

Product Code: ps_ac2741b

DAZ Original: NO

Released: 07/21/2008

Product Information

  • Required Products: Aiko 4 Base, V4 Elite Body Shapes, Victoria 4.2 Base
  • You can find icons for loading this product in the following Poser libraries:
  • Figures: “Gareee:MartianPrincess”
  • Pose: “Gareee:MartianPrincess”

Product Notes

Thank you for purchasing the Martian Princess Base set.

The Martian Princess base set includes:

  • Martian Princess Top
    (This conforms to V4.2)
    • Selecting the Top Body will give you access to the TriBangle controls.
    • When using the fit morphs, you'll find in many cases, that the triBanges no longer are properly in place. This is normal behavior.
    • Rather then bloat up the cr2 with more ERC controls a set of X/Y/Z TriBangle translation adjustments are built into the body of the bra figure. Use these to position the TriBangles as you choose for the desired fit morph. There are two sets of TriBangle controls, one set for translation, and another set for Rotation, Side-Side, and Front-Back posing for dynamic looking renders, and scaling for more appearance options. In addition, you'll also find that by selecting the FrontChain, that it has X/Y/Z tranlation ability as well, and full scalability. Also, you'll find the Front Chain has the ability to “swing” forewards and back by selecting it, again for more dynamic renders.
      • TIP: Use the TriBangle and FrontChain controls to not only reposition the them “properly”, but to also add additional style options… for instance, the tribangles can be reposed to be on the chain side of the Bra, or the FrontChain could be scaled and repositioned to stretch from bra tip to bra tip!
  • Martian Princess Bottoms
    (This conforms to V4.2)
    • Rather then bloat up the cr2 with more ERC controls a set of X/Y/Z TriBangle translation adjustments are built into the body of the Bottoms figure as well. Use these to position the TriBangles as you choose for the desired fit morph. There are two sets of TriBangle controls, one set for translation, and another set for Rotation, Side-Side, and Front-Back posing for dynamic looking renders, and scaling for more appearance options.
    • Select the Hip group of the Bottoms for leg pose morphs for the front cloth, and also for the SraightSide style option, as well as some additional minor adjustment morphs to might find useful.
    • The long back loincloth is EasyPose controlled, and selecting the LoinB1 group will give you the root main easypose controls. selecting any of th chid groups will also give you access to the easypose controls for the rest of the backcloth as well.
    • Also, you'll find a Pose to hide both the Front and Back Cloth, leaving you with a Bikini styled bottoms as well!
  • Martian Princess Wrist and Shin accessories
    (These conform to the figure)
    • You can add more style options by selecting any of the shin or wrist guards, and turning OFF thier visibility. (You might want only wrist guards, only shin guards, or might only want shin guards and a right wrist guard. Be creative to more diverse renders!)
    • Each Martian Princess clothing figure comes with a host of material zones… this is so you can combine the included materials to come up with a ton of different looks, rather then be limited by 1 ot 2 included textures. Since most of these use the same reflection map for metals or jewels, you'll find this also reduced the system overhead for the entire set, allowing you to devote your system resources to the main figure, and additional scene props.
    • Special Metalflake Poser materials are also included as well for even MORE appearance options. For best results, in poser's advanced render options, set pixel samples up to at least 6 (8 is ideal), and min shading rate down to 0.
    • Some base group material settings are provided for all Martian Princess figures, however do not limit your creativity to these alone!
    • In addition, for your convienience, you will also find a mat pose to apply just the cloth material and texture. This only affects the cloth materials.
      • TIP: For ShaderSpider users: Apply the base “gem setting” material you want to any material. Use shade spider's copy all feature to copy that to all materials. Then apply whichever cloth material material or pose (if applicable), and then set the gem materail settings. (Optionally (and better) creat material groups for settings, and gems.. you can them quickly swap out different material combinations for experimentation!)
      • Note: due to differences in the Materials setup, Poser procedural textures cannot be converted to work in DAZ Studio.
      • Note: As of this release, the current DAZ Studio Build has some conforming issues, that will hopefully be corrected in it's next build.

There are many free DAZ Studio Material shader presets can be used in the DAZ Studio Freepository Here are a few direct links to threads:

http://forum.daz3d.com/viewtopic.php?t=72275

http://forum.daz3d.com/viewtopic.php?t=67084

http://forum.daz3d.com/viewtopic.php?t=82733

http://forum.daz3d.com/viewtopic.php?t=76589

http://forum.daz3d.com/viewtopic.php?t=56514

The meshes are denser then some clothing items, but that's because they have detail to them. Make sure you also turn poser smoothing ON for renders.. all the bits have specific smoothing settings on them to make them look even more heavily modeled.

Also, don't forget after setting your figures pose n such, to adjust the tribangles on everything.. I even I kept forgetting them. (And if you want, you can always hide them in the figure as well, if ya want a different appearance.)

There is also an associated freebie for this set, a free matching conforming waist chain.

There is an experimental update to this product now. It potentially improves clothing posebility. Download it at the shareCG link, and extract it into the base folder which contains your installed Martian Princess Base product. This WILL overwrite the original CR2 files, however I have not seen any detriments; only improvements. if issues do occur with these new CR2 files, simply reinstall the original product archive in the same location to restore the original files….(Gareee, 7/26/2008) http://www.sharecg.com/v/27569/poser/Martian-Princess-Base-Update

Base Set WaistChain Freebie:

NEW ALTERNATE "ANIMAL" TEXTURES RELEASED

1/1/2009 New Textures released for the Martian Princess outfit Over at Renderosity http://www.renderosity.com/mod/bcs/index.php?ViewProduct=68800&vendor=19711

full68800.jpg

Support

Visit our site for further technical support questions or concerns: http://www.daz3d.com/i.x/support

[IMG]http://www.renderosity.com/mod/bcs/photos/Full68800.jpg [IMG]

Thank you and enjoy your new products!

DAZ Productions Technical Support

12637 South 265 West #300

Draper, UT 84020

Phone:(801) 495-1777

FAX:(801) 495-1787

TOLL-FREE 1-800-267-5170

File Listing

None