User Tools

Site Tools


Generations Bundle - Bryce

image_medium.jpg

Lise's Sky Collection Album 1

image_medium.jpg

Product: Lise's Sky Collection Album 1
Product Code: br_sk002
DAZ Original: Yes
Created By: Lise Sky
Released: May 9, 2005

Product Information

  • Required Products: BRYCE 6.1.
  • You can find new presets/files for Bryce in the following folder(s):
  • Skies:Lise Lebel

Product Notes

  • Once installed, you'll find the sky file inside the Skies:Lise Lebel folder.
  • To use the files, open the Sky Library, click on Import, then navigate to the Skies:Lise Lebel folder, select the sky file to import, and click on OK.

Support

Visit our site for further technical support questions or concerns: http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing

Lise's Sky Collection Album 1

\Skies\Lise Lebel\

Lise's Sky Collect A1.bsk

Karanta's 100 Sky Settings for Bryce 5

image_medium.jpg

Product: Karanta's 100 Sky Settings for Bryce 5
Product Code: br_sk003b
DAZ Original: YES
Created By: Karanta
Released: May 15, 2005


Product Information

  • Required Products: Bryce 5

Product Notes

* Notes from the artist:
* You can find new icons for loading this product in the following folder:
* Skies:Karanta


* To import your new sky settings please follow these instructions:
* Start Bryce
* Click in the menu on the little grey arrow next to “Sky & Fog ”
* A new window pops up
* Click on “Import” and search on your HD for the file “100BryceSkySettings_karanta”
* Click on OK


Artist's Acknowledgments:
I hope you have fun with your new sky settings!
Happy Rendering!
Kerstin (karanta)

Resolved Issues

  • None

Known Issues

  • None

Support

Visit our site for further technical support questions or concerns: http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing


—————————————————————————————————-
\Skies\Karanta\
—————————————————————————————————-
100BryceSkySettings_karanta.bsk

Psi City Sampler & SignMan 12

image_medium.jpg

Product: Psi City Sampler & SignMan 12
Product Code: br_ob040
DAZ Original: Yes
Created By: Simon A. Schild
Released: March 7, 2007

Product Information

  • Required Products: Bryce 5.5 or 6.
  • You can find new presets/files for Bryce in the following folder(s):
    • Content:Simon Schild:PSI City Sampler

Product Notes

  • To use the objects, do the following:
    • Navigate to the Bryce 6:Presets:Objects folder and create a new folder called “Simon Schild”
    • Copy the OBP files from the PSI City Sampler folder
    • Paste inside theBryce 6:Presets:Objects:Simon Schild folder * OR * Import each OBP file into any Object Library in Bryce

Support

Visit our site for further technical support questions or concerns: http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing

Psi City Sampler & SignMan 12

\Content\Simon Schild\Psi City Sampler\

PsiCitySampler.obp
SignManSet1.obp
SignManSet2.obp

AquaZone QuickSet Props

image_medium.jpg

Product: AquaZone QuickSet Props
Product Code: br_sc007
DAZ Original: Yes
Created By: The AntFarm
Released: May 19, 2005

Product Information

  • Required Products: Bryce 5 or higher
  • You can find new presets/files for Bryce in the following folder(s):
    • Content:The AntFarm:AquaZone

Product Notes

  • Due to the hatch and other items being parented to walls, these items are all provided as scene files that can be merged as needed.
  • The AZModelsUntextured contains four separate scene files containing the four main sections of the prop.
  • The AZ_NewTextures folder contains the complete prop textured with the “New” textures, along with the actual textures.
  • The AZ_OldTextures folder contains just the “Old” textures to change out with the “New” ones.
  • The AZ_MiscTextures folder contains textures just for the Starter Wall to create a variety of different looks and moods.
  • The best way to align props in Bryce would be using the Alignment Tool in the Edit menu. I included a fully constructed model in the package hoping that would be the one distributed as it saves you from the initial pain on placing them. So far Bryce doesn't have a “Spawn Props” type function so every mesh is brought in centered causing you to move it to it's proper location and creating a numeric position in the Object Attributes window other than “0”.
  • Items can also be aligned the in the Object Attributes window. The Object Attributes window is also a good way to open the wall or floor hatch. The door will rotate along it's axis “Y” 360 degrees but is designed to look best at Y 90.00 for full opened, Y 0.0 is closed. The floor hatch can be placed where ever you think it works best on the concrete area or just ajar (in the floor hatches case the closed “Position” is not zero but X 0.06, Y 2.78, Z 0.88 this is helpful to note when you want to place it back.) The fly wheel on the door hatch is deigned to turn as well, in case you wish to animate the opening. All moveable props are Linked to their Parent props in the Object Attributes window and need to remain that way if you want them to operate correctly.
  • If the models are loaded without textures follow these steps for each part of the “Grouped” prop. Select your target part by cycling the Tab key. Follow the steps below and make sure to save your prop fully textured to save yourself these steps in the future.
    • Textures are all applied with the Texture Source Editor. This is the second button from the left on the top row of the Materials Lab pop up window. The best way to begin is after loading a prop click the small “M” (if in wire frame view) to open the Materials Lab window. Click the top of column “A” next to the word “Diffuse” and a dot is placed. Leo should appear in the pop up window to the right. Click the Texture Source Editor button and a new window appears “Pictures”. Just click on a blank square and a Prompt will ask what image you want. Navigate to the texture with the same name as your prop or prop part and click OK. The texture should appear in the first and third window, click OK. Depending upon your defaults the settings for the “Diffuse” may be set at 100. It's best to balance this with the Ambience so I place it at 70 and the Ambience at 30 this works pretty well to give a Realistic look. You must click the “A” column next to the Ambient channel and place a dot before this take effect. For textures with transparent parts drop the provided texture in the center window of the “Picture” window and make sure you dial up the Transparency slider in the Materials Lab and place the dot in the “A” column next to the channel.
    • For all additional wall textures that may be included in this package, They are applied the same way as other textures listed above. The only exception is you will need to chose the manner of projection as they are not UV mapped. This is easy to do, select the Texture Mapping Mode, the button in the bottom right corner of Leo's pop up. From the drop down window pick “Object Front” and you're set. The “Starter Wall” has three parts, for best results apply this to the entire grouped wall.

Your Friends at the AntFarm

Support

Visit our site for further technical support questions or concerns: http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing

AquaZone QuickSet Props

\Content\The AntFarm\AZ_ModelsUntextured\

AZ GratedFloor.br5
HatchWall_noText.br5
StarterFloor.br5
StarterWall.br5

\Content\The AntFarm\AZ_NewTextures\

StarterFloor_map.jpg
StaterWall_map.jpg

\Content\The AntFarm\AZ_NewTextures\AZ GratedFloor Textures\

floor_grate_bump.jpg
Floor_Grate_map.jpg
Floor_hatch_map.jpg
Grate_Holes_map.jpg
Metal_Grate.jpg

\Content\The AntFarm\AZ_NewTextures\AZHatch Maps\

Fly_Wheel.jpg
Full_HatchWall.jpg
Hatch_Door.jpg
Hatch_Wall.jpg
PressurePipe.jpg
UpperPipes.jpg

\Content\The AntFarm\AZ_OldTextures\

AZ_FloorHatchTop.jpg
AZ_FloorHathBottom.jpg
AZ_Hatch_map.jpg
AZ_UniFloor.jpg
AZ_Water.jpg
AZBaseWall.jpg
AZGrateFloor.jpg
floor_texture.jpg
floor4.jpg
HatchLatch.jpg
LowerPipe.jpg
upperPipes.jpg

\Content\The AntFarm\AZ_MiscTextures\AZStarterWall Textures\

AQUAZONE1.jpg
AQUAZONE2.jpg
AQUAZONE3.jpg
AQUAZONE4.jpg
AQUAZONE5.jpg

\Content\The AntFarm\AZ_MiscTextures\AZStarterWallMOODS\

AQUAGORUND_MOOD.jpg
AQUAZONE1_MOOD.jpg
AQUAZONE2_MOOD1.jpg
AQUAZONE2_MOOD2.jpg
AQUAZONE3_MOOD.jpg
AQUAZONE4_MOOD.jpg
AQUAZONE5_MOOD.jpg
AQUAZONE5_MOOD_EYE.jpg

\Content\The AntFarm\AZ_MiscTextures\AZStarterWallWAVES\

AQUAGORUND_WAVES.jpg
AQUAZONE1_WAVES.jpg
AQUAZONE2_WAVES.jpg
AQUAZONE3_WAVES.jpg
AQUAZONE4_WAVES.jpg
AQUAZONE5_WAVES.jpg

\Content\The AntFarm\AZ_NewTextures\AZNewFullSetTextured\

AZFullSetTextured.bmp
AZFullSetTextured.br5

Bryce Terrain Sampler

image_medium.jpg

Product: Bryce Terrain Sampler
Product Code: br_tr004
DAZ Original: YES
Created By: Stephen Ray
Released: May 9, 2005

Product Information

  • Required Products: BRYCE 6.1
  • You can find new presets/files for Bryce in the following folder(s)
    • Presets:Materials:Stephen Ray
    • Content:Stephen Ray:Terrain Sampler
    • Skies:Stephen Ray

Product Notes

  • Import the skies by opening the Sky Library and clicking on Import. Navigate to the Skies:Stephen Ray folder, select the sky file, and click on OK.
  • Because of the size of the terrains, they were not installed to the Objects Library as that would have placed only one or two of them into each preset library. Instead, they can be found in the Content folder and imported via the Objects Library import function.

Support


Visit our site for further technical support questions or concerns: http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing


Stephen Ray's Terrain Sampler —————————————————————————————————- \Content\



\Content\Stephen Ray\



\Content\Stephen Ray\Terrain Sampler\


Crater Pool.obp
Distant Island.obp
Tile Terrains 4.obp
Tile Terrains 5.obp
Tile Terrains 6.obp
Tree & Terrain.obp
—————————————————————————————————- \Presets\



\Presets\Materials\



\Presets\Materials\Stephen Ray\


Terrain Sampler.mat
—————————————————————————————————- \Skies\



\Skies\Stephen Ray\


SRay Sky Sampler.bsk

Bryce Object Collection Alpha

image_medium.jpg

Product Information

Required Products:

  • BRYCE 6 (Not compatible with earlier versions of Bryce.)

You can find new presets/files for Bryce in the following folder(s):

  • Content:Clay Hagebusch:B6 Objects

View files installed for this product: ClaysB6Objects1_LIST

Resolved Issues

Known Issues

Support


Visit our site for further technical support questions or concerns:

http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777

FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File List

Clay's Bryce 6 Objects



\Content\



\Content\Clay Hagebusch\



\Content\Clay Hagebusch\B6 Objects\


B6Objects1.obp

Pirate's Delight

image_medium.jpg

Product: A Pirate's Delight
Product Code: br_ob055
DAZ Original: YES
Created By: Jonathan Allen Cummings
Released: October 25, 2006

Product Information

  • Required Products: BRYCE 5 or higher.
  • You can find new presets/files for Bryce in the following folder(s):
    • Scene Files:JonathanCummings

Product Notes

* Scene file is compatible with Bryce 5, 5.5, and 6.

Support


Visit our site for further technical support questions or concerns: http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing


\Scene Files\



\Scene Files\JonathanCummings\


A Pirate's Delight.br5