User Tools

Site Tools


Sidebar

Table of Contents


Old ArtZone Wiki Navigation


Bryce Incentives Bundle

image_medium.jpg

Product: Bryce Incentives Bundle
DAZ Original: YES


Product Information

  • 58 DAZ Original Bryce Products
  • Required Products: Bryce 6.1

100 WS Bryce Skies

image_medium.jpg

Product: WS 100 Bryce Skies
Product Code: br_sk001
DAZ Original: YES
Created By: whiskeysierra
Released: May 9, 2005

Product Information

  • Required Products: BRYCE 5.
  • You can find new sky presets for Bryce in the following folder(s):
  • Skies:whiskeysierra

Product Notes

  • Once installed, you'll find the sky files inside the Skies:whiskeysierra folder. The sky files are available in two .BSK files of

50 skies each.

  • To use the files, open the Sky Library, click on Import, then navigate to the Skies:whiskeysierra folder, select the sky file to

import, and click on OK.

Support

Visit our site for further technical support questions or concerns:

http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing

Whiskey Sierra's 100 Skies for Bryce

\Skies\

\Skies\WhiskeySierra\

WS_100Skies_1-50.bsk
WS_100Skies_51-100.bsk

24 Fantasy Terrains for Bryce 6

image_medium.jpg

Product: 24 Fantasy Terrains for Bryce 6
Product Code: br_tr17b
DAZ Original: Yes
Created By: karanta
Released: November 10, 2006

Product Information

  • Required Products: Bryce 6.0 or higher.
  • You can find new icons for loading this product in the following Libraries:
    • “\Karanta\24 Fantasy Terrains”

Product Notes

  • To import your new Bryce Terrains please follow these instructions:
  • Start Bryce:
    • Click in the Menu on the little grey arrow next to “Create”.
      • A new window pops up.
      • Click on a category of your choice on the left bottom side of the windowfor example “User”.
      • Click on “Import” and navigate to the folder listed above in your Bryce 6 directory and select the “24

Fantasy Terrains” file.

  • Click on OK.
  • If you would rather add the terrains as a new library instead, do the following:
  • Navigate to the folder listed above in your Bryce 5 directory, select the “24 Fantasy Terrains” file and copy

it.

  • Navigate to the Presets:Materials folder in the Bryce directory.
  • Create a new folder and name it “karanta”.
  • Open the folder and paste the “24 Fantasy Terrains” file inside.
  • Open Bryce and access the Terrains Library and choose “karanta” from the pulldown listing to access the

terrains.

Artist's Acknowledgments:
ARTISTSTHANKS I hope you have fun with your new Bryce Terrains

Happy Rendering!
Kerstin (karanta)

Support

Visit our site for further technical support questions or concerns: http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing

24 Fantasy Terrains for Bryce 6

\Karanta\24 Fantasy Terrains\

karanta_FantasyTerrainsBR6.obp

Advanced Widgets Set # 1

image_medium.jpg

  • Product Code: br_ob057
  • DAZ Original: YES
  • Created By: Jonathan Cummings
  • Released: November 12, 2006

Product Information

Required Products:

  • BRYCE 5 or above

You can find new presets/files for Bryce in the following folder(s):

  • Content:Jonathan Cummings:Advanced Widgets 1

View files installed for this product: AdvWidgets1_LIST

Product Notes

To use these presets:

  • Navigate to the Content:Jonathan Cummings:Advanced Widgets 1 folder, select the OBP files, and copy them
  • Navigate to the Bryce Presets:Objects folder and create a new folder called “Adv Widgets”
  • Paste the copied OBP files into the new folder

The objects will be available in your Object Presets library

You can leave the presets as they are or merge them by importing the b, c, and d files into the a category

Resolved Issues

Known Issues

Support


Visit our site for further technical support questions or concerns:

http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777

FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File List

Advanced Widgets Set #1
—————————————————————————
—————————————————————————
\Content\
—————————————————————————
—————————————————————————
\Content\Jonathan Cummings\
—————————————————————————
—————————————————————————
\Content\Jonathan Cummings\Advanced Widgets 1\
—————————————————————————
Adv Widgets 1a.obp
Adv Widgets 1b.obp
Adv Widgets 1c.obp
Adv Widgets 1d.obp

AH-9100

image_medium.jpg

Product: AH-9100
Product Code: br_ob013
DAZ Original: YES
Created By: Phil Drawbridge
Released: August 8, 2005


Product Information

  • Required Products: BRYCE 5

Product Notes

* Notes from the artist:
* You can find new presets/files for Bryce in the following folder(s):
* Content:Phil Drawbridge:AH-9100


* To use this item, do the following:
* Open Bryce, then access the Objects Library.
* Select the sub-library where you want to import the ship and click in Import.
* Navigate to the folder listed above, select the AH-9100.obp, and click on Open.
* The ship will now be available in the library.

Resolved Issues

  • None

Known Issues

  • None

Support

Visit our site for further technical support questions or concerns: http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing


\Content\Phil Drawbridge\AH-9100\AH-9100.obp

AquaZone QuickSet Props

image_medium.jpg

Product: AquaZone QuickSet Props
Product Code: br_sc007
DAZ Original: Yes
Created By: The AntFarm
Released: May 19, 2005

Product Information

  • Required Products: Bryce 5 or higher
  • You can find new presets/files for Bryce in the following folder(s):
    • Content:The AntFarm:AquaZone

Product Notes

  • Due to the hatch and other items being parented to walls, these items are all provided as scene files that can be merged as

needed.

  • The AZModelsUntextured contains four separate scene files containing the four main sections of the prop.
  • The AZ_NewTextures folder contains the complete prop textured with the “New” textures, along with the actual textures.
  • The AZ_OldTextures folder contains just the “Old” textures to change out with the “New” ones.
  • The AZ_MiscTextures folder contains textures just for the Starter Wall to create a variety of different looks and moods.
  • The best way to align props in Bryce would be using the Alignment Tool in the Edit menu. I included a fully constructed model

in the package hoping that would be the one distributed as it saves you from the initial pain on placing them. So far Bryce doesn't

have a “Spawn Props” type function so every mesh is brought in centered causing you to move it to it's proper location and creating a

numeric position in the Object Attributes window other than “0”.

  • Items can also be aligned the in the Object Attributes window. The Object Attributes window is also a good way to open the

wall or floor hatch. The door will rotate along it's axis “Y” 360 degrees but is designed to look best at Y 90.00 for full opened, Y

0.0 is closed. The floor hatch can be placed where ever you think it works best on the concrete area or just ajar (in the floor hatches

case the closed “Position” is not zero but X 0.06, Y 2.78, Z 0.88 this is helpful to note when you want to place it back.) The fly

wheel on the door hatch is deigned to turn as well, in case you wish to animate the opening. All moveable props are Linked to their

Parent props in the Object Attributes window and need to remain that way if you want them to operate correctly.

  • If the models are loaded without textures follow these steps for each part of the “Grouped” prop. Select your target part by

cycling the Tab key. Follow the steps below and make sure to save your prop fully textured to save yourself these steps in the future.

  • Textures are all applied with the Texture Source Editor. This is the second button from the left on the top row of

the Materials Lab pop up window. The best way to begin is after loading a prop click the small “M” (if in wire frame view) to open the

Materials Lab window. Click the top of column “A” next to the word “Diffuse” and a dot is placed. Leo should appear in the pop up

window to the right. Click the Texture Source Editor button and a new window appears “Pictures”. Just click on a blank square and a

Prompt will ask what image you want. Navigate to the texture with the same name as your prop or prop part and click OK. The texture

should appear in the first and third window, click OK. Depending upon your defaults the settings for the “Diffuse” may be set at 100.

It's best to balance this with the Ambience so I place it at 70 and the Ambience at 30 this works pretty well to give a Realistic look.

You must click the “A” column next to the Ambient channel and place a dot before this take effect. For textures with transparent parts

drop the provided texture in the center window of the “Picture” window and make sure you dial up the Transparency slider in the

Materials Lab and place the dot in the “A” column next to the channel.

  • For all additional wall textures that may be included in this package, They are applied the same way as other

textures listed above. The only exception is you will need to chose the manner of projection as they are not UV mapped. This is easy to

do, select the Texture Mapping Mode, the button in the bottom right corner of Leo's pop up. From the drop down window pick “Object

Front” and you're set. The “Starter Wall” has three parts, for best results apply this to the entire grouped wall.

Your Friends at the AntFarm

Support

Visit our site for further technical support questions or concerns: http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing

AquaZone QuickSet Props

\Content\The AntFarm\AZ_ModelsUntextured\

AZ GratedFloor.br5
HatchWall_noText.br5
StarterFloor.br5
StarterWall.br5

\Content\The AntFarm\AZ_NewTextures\

StarterFloor_map.jpg
StaterWall_map.jpg

\Content\The AntFarm\AZ_NewTextures\AZ GratedFloor Textures\

floor_grate_bump.jpg
Floor_Grate_map.jpg
Floor_hatch_map.jpg
Grate_Holes_map.jpg
Metal_Grate.jpg

\Content\The AntFarm\AZ_NewTextures\AZHatch Maps\

Fly_Wheel.jpg
Full_HatchWall.jpg
Hatch_Door.jpg
Hatch_Wall.jpg
PressurePipe.jpg
UpperPipes.jpg

\Content\The AntFarm\AZ_OldTextures\

AZ_FloorHatchTop.jpg
AZ_FloorHathBottom.jpg
AZ_Hatch_map.jpg
AZ_UniFloor.jpg
AZ_Water.jpg
AZBaseWall.jpg
AZGrateFloor.jpg
floor_texture.jpg
floor4.jpg
HatchLatch.jpg
LowerPipe.jpg
upperPipes.jpg

\Content\The AntFarm\AZ_MiscTextures\AZStarterWall Textures\

AQUAZONE1.jpg
AQUAZONE2.jpg
AQUAZONE3.jpg
AQUAZONE4.jpg
AQUAZONE5.jpg

\Content\The AntFarm\AZ_MiscTextures\AZStarterWallMOODS\

AQUAGORUND_MOOD.jpg
AQUAZONE1_MOOD.jpg
AQUAZONE2_MOOD1.jpg
AQUAZONE2_MOOD2.jpg
AQUAZONE3_MOOD.jpg
AQUAZONE4_MOOD.jpg
AQUAZONE5_MOOD.jpg
AQUAZONE5_MOOD_EYE.jpg

\Content\The AntFarm\AZ_MiscTextures\AZStarterWallWAVES\

AQUAGORUND_WAVES.jpg
AQUAZONE1_WAVES.jpg
AQUAZONE2_WAVES.jpg
AQUAZONE3_WAVES.jpg
AQUAZONE4_WAVES.jpg
AQUAZONE5_WAVES.jpg

\Content\The AntFarm\AZ_NewTextures\AZNewFullSetTextured\

AZFullSetTextured.bmp
AZFullSetTextured.br5

Breathe Deep

image_medium.jpg

  • Product: Breathe Deep
  • Product Code: br_sc027
  • DAZ Original: YES
  • Created By: Jonathan Allen Cummings
  • Released: March 27, 2007

Product Information

Required Products:

  • BRYCE 5 or higher

You can find new presets/files for Bryce in the following folder(s):

  • “Scene Files:Jonathan Cummings:Breathe Deep”

View files installed for this product: BreatheDeepLIST

Product Notes

  • Includes scene file to study for composition, material creation, terrain placement, Bryce tree creation, etc.
  • Scene file is in .BR5 format for compatibility with Bryce 5, 5.5 and 6.

Resolved Issues

Known Issues

Support


Visit our site for further technical support questions or concerns:

http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777

FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File List

Breathe Deep
—————————————————————-
—————————————————————-
\Scene Files\
—————————————————————-
—————————————————————-
\Scene Files\Jonathan Cummings\
—————————————————————-
—————————————————————-
\Scene Files\Jonathan Cummings\Breathe Deep\
—————————————————————-
Breathe Deep.bmp
Breathe Deep.br5

Bryce 5.0 Content Pack

image_medium.jpg

Product Information

Unpacks 264 MBytes of content from “Bryce 5.0 Content Pack” to 10 folders:

  • B5P1-3d Meshes
  • B5P2-Bryce 4 Model Libraries
  • B5P3-Light Gels
  • B5P4-Picture Objects
  • B5P5-Picture Textures
  • B5P6-Picture Textures2
  • B5P7-Sample Scenes
  • B5P8-Sky Presets
  • B5P9-Terrain Libraries
  • B5PA-Terrain Maps


Resolved Issues

Known Issues

Support


Visit our site for further technical support questions or concerns:

http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777

FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File List

Bryce 5.5 Content Kit: Volume 1

image_medium.jpg

Product: Bryce 5.5 Content Kit- Volume 1
Product Code: br_sc005
DAZ Original: YES
Created By: DAZ Original
Released: April 28, 2005


Product Information

  • Required Products: BRYCE 5

Product Notes

This bundle includes the following 7 products:

Product: 30 Island Terrains
Created By: Karanta
Released: April 28, 2004
* You can find new presets for Bryce in the following folder(s):
* Presets:Objects:DAZ Terrains

Product: Models by Alfons Blom
Created By: Alfons Blom
Released: April 27, 2005
* You can find new presets for Bryce in the following folder(s):
* Content:DAZ Content:Models:Alfons Blom

Product: Fantastic Metals Set 2
Created By: Karanta
Released: April 28, 2004
* You can find new presets for Bryce in the following folder(s):
* Presets:Materials:DAZ Metals

Product: Foleypro's Tutorials
Created By: Brian Foley
Released: May 3, 2005
* You can find new files and presets for Bryce in the following folder(s):
* Tutorials:DAZ Content:FoleyPro
* Included with this package are tutorials for 2D Trees, Stumps & Trunks, Clouds, and Winter Memories plus a sampling of the trees available in separate FoleyPro packages in the DAZ Store.
* If you installed a previous version of this package, please delete the Scene Files folder inside the Tutorials\DAZ Content\FoleyPro\StumpsNtrunks as the folder contains the old OBP file that crashes Bryce.
* In the \Tutorials\DAZ Content\FoleyPro\Scene File and OBPs\ folder, you'll find a scene file and a Foleypro folder containing an OBP file. Both the scene file and the OBP contain the same trees with one exception, the SpecialMountainAsh tree. This tree is a grouped Bryce Tree and will crash Bryce if you attempt to import or export the OBP file or even select the tree once the file is installed into the Objects Library.
* To install the OBP file, navigate to the Tutorials\DAZ Content\FoleyPro\Resource Files folder, select and copy the FoleyPro folder you'll find there, then navigate to the Bryce 5.5\Presets\Objects\User folder and paste the copied folder inside. Now open Bryce and access the trees through the Objects Library.
Please note that clicking more than once on the Special Hemlock tree may crash Bryce as this tree is a Bryce Tree saved to the library.
* If you have any problems with the OBP file, remember that the included scene file has the exact same trees included plus additional items.
* Contents of OBP file:
* AutumnApple_5 - 2D Tree
* AutumnAspen_2 - 2D Tree
* AutumnCedar_5 - 2D Tree
* AutumnFir_5 - 2D Tree
* FoleyproOldTree1 - Mesh
* OldStump_1 - Mesh
* DeadTree_7 - Mesh
* DeadTree_7 - Mesh
* SpecialHemlock - Bryce Tree
* Contents of Scene File:
* AutumnApple_5 - 2D Tree
* AutumnAspen_2 - 2D Tree
* AutumnCedar_5 - 2D Tree
* AutumnFir_5 - 2D Tree
* FoleyproOldTree1 - Mesh
* OldStump_1 - Mesh
* DeadTree_7 - Mesh
* DeadTree_7 - Mesh
* SpecialHemlock - Bryce Tree
* SpecialMountainAsh - Grouped Bryce Tree
* CloudPlane - for Clouds tutorial
* FoleyproLandMass - for Winter Memories tutorial

Product: Gothic Cathedral
Created By: CatBird Studios (Darlisa Riggs)
Released: April 27, 2005
* You can find new files and scenes for Bryce in the following folder(s):
* Content:DAZ Content:Scene Files:Gothic Cathedral

Product: Lise Lebel's Sky Album Sampler
Created By: Lise Lebel
Released: April 27, 2005
* You can find new presets for Bryce in the following folder(s):
* Skies:DAZ Content:Lise LeBel

Product: World War 2 Destroyer
Created By: BeyondVR
Released: April 27, 2005
* You can find new files and presets for Bryce in the following folder(s):
* Content\DAZ Content\Materials\BeyondVR
* Content\DAZ Content\Objects\BeyondVR
* Content\DAZ Content\Templates\BeyondVR
* Content\DAZ Content\Textures\BeyondVR\SigFlags
* Content\DAZ Content\Tutorials

Resolved Issues

  • None

Known Issues

  • None

Support

Visit our site for further technical support questions or concerns: http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing


—————————————————————————————————-
\Presets\Objects\DAZ Terrains\
—————————————————————————————————-
30 Islands.obp
—————————————————————————————————-
\Content\DAZ Content\Models\Alfons Blom\
—————————————————————————————————-
Bridge.obp
Chapel.obp
CountryHouse.obp
Lighthouse.obp
—————————————————————————————————-
\Presets\Materials\DAZ Metals\
—————————————————————————————————-
FantasticMetals2.mat
—————————————————————————————————-
\Tutorials\DAZ Content\FoleyPro\2DTrees\
—————————————————————————————————-
Foleypro2DTrees.pdf
—————————————————————————————————-
\Tutorials\DAZ Content\FoleyPro\FoleyproClouds\
—————————————————————————————————-
Foleypro Clouds Tutorial.pdf
—————————————————————————————————-
\Tutorials\DAZ Content\FoleyPro\Resource Files\
—————————————————————————————————-
BrianFoleyPromo.bmp
BrianFoleyPromo.br5
OBP_Readme.txt
—————————————————————————————————-
\Tutorials\DAZ Content\FoleyPro\Resource Files\FoleyPro\
—————————————————————————————————-
BrianFoleyPromo.obp
—————————————————————————————————-
\Tutorials\DAZ Content\FoleyPro\StumpsNtrunks\
—————————————————————————————————-
Stumps&Trunks.pdf
—————————————————————————————————-
\Tutorials\DAZ Content\FoleyPro\WinterMemories\
—————————————————————————————————-
Winter Memories Tutorial.pdf
—————————————————————————————————-
\Content\DAZ Content\Scene Files\Gothic Cathedral\
—————————————————————————————————-
01_CentralDoors.br5
02_centralDoorTrim.br5
03_CentralDoorPosts.br5
04_CentralFloorTrim.br5
05_CentralUpperWindows.br5
06_CentralRoofTrim.br5
07_TowerBase.br5
08_TowerFirstSecond.br5
09_TowerThird.br5
10_TowerFourth.br5
11_TowerFifth.br5
12_TowerSteeple.br5
13_TowerTrim.br5
14_TowerPosts.br5
Full_Building.br5
GothicCathedral.html
GothicCathedral.jpg
—————————————————————————————————-
\Skies\DAZ Content\Lise LeBel\
—————————————————————————————————-
Lise LeBel Albums.bsk
—————————————————————————————————-
\Content\DAZ Content\Materials\BeyondVR\
—————————————————————————————————-
KiddMats.mat
—————————————————————————————————-
\Content\DAZ Content\Objects\BeyondVR\
—————————————————————————————————-
Mk9-DC.obp
USS Kidd.obp
—————————————————————————————————-
\Content\DAZ Content\Templates\BeyondVR\
—————————————————————————————————-
48flagT.jpg
A-BflagT.jpg
chainpropT.jpg
cyl-dcT.jpg
C-ZflagT.jpg
jackT.jpg
numflagT.jpg
repeatT.jpg
teardrop-dcT.jpg
torpedoT.jpg
ww2ddT1.jpg
ww2ddT2.jpg
—————————————————————————————————-
\Content\DAZ Content\Textures\BeyondVR\SigFlags\
—————————————————————————————————-
1repeat.jpg
2repeat.jpg
3repeat.jpg
codeans.jpg
letAtex.jpg
letBtex.jpg
letCtex.jpg
letDtex.jpg
letEtex.jpg
letFtex.jpg
letGtex.jpg
letHtex.jpg
letItex.jpg
letJtex.jpg
letKtex.jpg
letLtex.jpg
letMtex.jpg
letNtex.jpg
letOtex.jpg
letPtex.jpg
letQtex.jpg
letRtex.jpg
letStex.jpg
letTtex.jpg
letUtex.jpg
letVtex.jpg
letWtex.jpg
letXtex.jpg
letYtex.jpg
letZtex.jpg
num0tex.jpg
num1tex.jpg
num2tex.jpg
num3tex.jpg
num4tex.jpg
num5tex.jpg
num6tex.jpg
num7tex.jpg
num8tex.jpg
num9tex.jpg
—————————————————————————————————-
\Content\DAZ Content\Tutorial\
—————————————————————————————————-
WW2-DD-Bryce.html
—————————————————————————————————-
\Content\DAZ Content\Tutorial\pics\
—————————————————————————————————-
alphabet.gif
flag.gif
flag2.gif
guns.gif
pennants.gif
snap.gif
bvrg.jpg
bvrgry.jpg
WW2P.jpg
kidd.txt

Bryce 6 Bonus Pack

image_medium.jpg

  • Product Code: br_ma027
  • DAZ Original: YES
  • Created By: DAZ et al
  • Released: ?

Product Information

Installs “Bryce 6 Bonus Content” to “C:\Program Files\DAZ\Bryce 6.1” by default. Also created an icon in the start menu.

Resolved Issues

Known Issues

Support


Visit our site for further technical support questions or concerns:

http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777

FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File List

Caverns

image_medium.jpg

Product: Caverns
Product Code: br_tr009
DAZ Original: Yes
Created By: Northern Studios
Released: May 22, 2005

Product Information

  • Required Products: Bryce 5 or higher
  • You can find new presets/files for Bryce in the following folder(s):
    • Content:Northern Studios:Caverns:Materials
    • Content:Northern Studios:Caverns:Objects

Product Notes

Welcome to the Caverns set.

  • We'd like you to know and take advantage of the following options:
    • Bryce loads all big items slightly off center. The caves have been sized to a large scale in order to make them

easier to pose, so please remember to drag them to the left or right or down, depending on your preference and scene.

  • Remember to add a light to the caves if you're inside them.
  • All three cave terrains have caves you can move around in. If you just want more cave, and no terrain, select the

terrain and delete it, remember to scale the remaining cave up.

  • The caves and terrains have different floors, the ones without are made so intentionally, so you can build a floor of

your own to suit your needs.

  • Bryce wraps different objects differently, so if you should have problems with any of the textures, please tweak them

in the Material Editor by clicking on the little arrow on the bottom right side of the material settings (Texture Mapping Mode)it will

bring up a list of ways you can wrap the texture. The caves should be wrapped either with random, world cubic, or parametric settings.

The landscapes in general will be fine with world space, parametric, or parametric scaled.

  • Although… wrapping them differently gives interesting results too.
  • The caves will make great background mountain ranges.
  • If you want to use a procedural texture in the caves, Bryce native ones like “Antique Clay Pots”, “Moonage DayDream”

and any cliffy texture will work very well. * Bryce 5.5 wraps some tiled textures somewhat differently than Bryce 5.0. Should any seams

show, please check the symmetric or repeat tiling options in the Texture Mapping Mode list.

  • Remember different terrains or objects need different scales, so remember to scale your textures as needed.
  • Once installed to the Bryce 5 directory, navigate to the Content:Northern Studios:Caverns folder, select both the

Materials and Objects folders, and copy them. Navigate back up to the main Bryce 5 directory, open the Presets folder and paste the

copied folders inside. The materials and objects are now available in the Objects and Materials Libraries under “Caverns.”

Artist's Acknowledgments: A big thank you to Dean Estes for testing the set on such short notice :)

Support

Visit our site for further technical support questions or concerns: http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing

Caverns

\Content\Northern Studios\Caverns\

Caves_README.txt

\Content\Northern Studios\Caverns\Materials\Caverns\

Caves.mat
Terrains 'n Rocks.mat
Water.mat

\Content\Northern Studios\Caverns\Objects\Caverns\

Caves.obp
Rocks.obp
Terrains 'n Water.obp

Bryce Masters Series: Cloud City

image_medium.jpg

Product: Cloud City Masters Series Tutorial
Product Code: br_sc003
DAZ Original: YES
Created By: Joe Vinton
Released: April 28, 2004



Product Information
* Required Products: Bryce 5
* You can find the tutorial in the following folder(s):
* Tutorials:Masters Series:Cloud City
* Support files (materials, objects) are located in the following folders:
* Materials - Presets:Materials:Masters Series
* Objects - Presets:Objects:Masters Series
* Skies - Content:Masters Series
* Scene - Scene Files:Masters Series


Product Notes
* To access the tutorial, open the Index.html page located in the Bryce 5:Tutorials:Masters Series:Cloud City folder.
* If you installed the tutorial directly into your Bryce 5 program folder, the materials and objects are all located in the

Materials and Objects Library, ready to load and examine.
* The skies will need to be manually imported into the Sky Library and are located in the Content:Masters Series folder.



Visit our site site for further technical support questions or concerns: www.daz3d.com/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
1350 E Draper Parkway
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787

TOLL-FREE 1-800-267-5170

Bryce Masters Series: Great Hall

image_medium.jpg

Product: The Great Hall Masters Series Tutorial
Product Code: br_sc001
DAZ Original: YES
Created By: Rudolf Herzog
Released: February 10, 2005



Product Information
* Required Products: Bryce 5
* You can find the tutorial in the following folder(s):
* Tutorials:Masters Series:The Great Hall
* Support files (materials, objects) are located in the following folders:
* Materials - Presets:Materials:Masters Series
* Objects - Presets:Objects:Masters Series
* Skies - Content:Masters Series
* Scene - Scene Files:Masters Series


Product Notes
* To access the tutorial, open the Index.html page located in the Bryce 5:Tutorials:Masters Series:The Great Hall folder.
* If you installed the tutorial directly into your Bryce 5 program folder, the materials and objects are all located in the

Materials and Objects Library, ready to load and examine.
* The skies will need to be manually imported into the Sky Library and are located in the Content:Masters Series folder.



Visit our site site for further technical support questions or concerns: www.daz3d.com/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
1350 E Draper Parkway
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787

TOLL-FREE 1-800-267-5170

Bryce Masters Series: Smoke and Mirrors

image_medium.jpg

Product: Smoke and Mirrors Masters Series Tutorial
Product Code: ps_sc010
DAZ Original: YES
Created By: David Wiles (Hamfast)

Released: August 14, 2005


Product Information
* Required Products: Bryce 5 or 5.5, Paint Program
* You can find the tutorial in the following folder(s):
*

Tutorials:Masters Series:Smoke n Mirrors
* Support files (materials, objects) are located in the following folders:
* Materials -

Presets:Materials:Masters Series
* Objects - Presets:Objects:Masters Series
* Skies/Base Scene - Content:Masters Series:Smoke n

Mirrors
* Runtime:Geometries:MastersSeries:SmokeMirrors
* Runtime:libraries:Camera:Smoke n Mirrors
*

Runtime:libraries:Character:Smoke n Mirrors
* Runtime:libraries:Hair:Smoke n Mirrors
* Runtime:libraries:Pose:SM Injections
*

Runtime:libraries:Pose:SM MATs P4
* Runtime:libraries:Pose:SM MATs PP56
* Runtime:libraries:Pose:SM MOR Files
*

Runtime:libraries:Pose:SM Poses
* Runtime:libraries:Props:SM Props P4
* Runtime:libraries:Props:SM Props PP56
*

Runtime:Textures:MastersSeries:SmokeMirrors

Product Notes

* Please note that all installation files ending in a “B” are to be installed to your main Bryce 5 folder while the installation file

ending in “P” is to be installed to your Poser folder. Poser 4 users can then delete the folders ending in “PP56” while Poser Pro Pack,

Poser 5, and Poser 6 users can delete the folders ending in “P4.”
* To access the tutorial, open the Index.html page located in the

Bryce 5:Tutorials:Masters Series:Smoke n Mirrors folder
* If you installed the tutorial directly into your Bryce 5 program folder,

the materials and objects are all located in the Materials and Objects Library, ready to load and examine.
* The skies will need to

be manually imported into the Sky Library and are located in the Content:Masters Series:Smoke n Mirrors folder.
* To use the

finished foundation scene to check placement of the scene elements (non-figure):
* Open the Basic Scene Finished 01.br5 file in

Bryce
* Choose File : Merge from the menu
* Select the Basic Scene Finished 02.br5 file and wait for the file to merge
*

Repeat to open the Basic Scene Finished 03.br5 file
* Click on the saved camera dot to return to the correct view.

Resolved Issues

Known Issues

  • None

Support

Visit our site for further technical support questions or concerns:

http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing

Smoke and Mirrors Masters Series Tutorial

\Tutorials

\Tutorials\Masters Series

\Tutorials\Masters Series\Smoke n Mirrors

00_Intro.html
01_Prep.html
02_Poser.html
03_Bryce.html
04_Compositing1.html
05_Compositing2.html
06_BasicScene.html
07_Orcs.html
08_PippinBoromir.html
Index.html

\Tutorials\Masters Series\Smoke n Mirrors\files

tutorial.css
bio.html
00_abutton.jpg
00_ebutton.jpg
00_fbutton.jpg
00_gbutton.jpg
00_mbutton.jpg
00_solomode.jpg
00_ubutton.jpg
ms_logo.jpg

\Tutorials\Masters Series\Smoke n Mirrors\files\basic

01_maintreeforeground.jpg
02_basicscene.jpg
02_basicscene_small.jpg
03_valleyslopeterrain.jpg
04_lowhillterrain.jpg
05_upperbackdrop.jpg
06_lowerbackdrop.jpg
07_backdroplights.jpg
08_beechforestgroup.jpg

\Tutorials\Masters Series\Smoke n Mirrors\files\basic\filleritems

2dcanopyshadow1.jpg
2dcanopyshadow1_small.jpg
2dcanopyshadow2.jpg
2dcanopyshadow2_small.jpg
2dfalsetreetop1.jpg
2dfalsetreetop1_small.jpg
2dfalsetreetop2.jpg
2dfalsetreetop2_small.jpg
2dfalsetreetop3.jpg
2dfalsetreetop3_small.jpg
2dfern1.jpg
2dfern1_small.jpg
2dfern10.jpg
2dfern10_small.jpg
2dfern11.jpg
2dfern11_small.jpg
2dfern12.jpg
2dfern12_small.jpg
2dfern13.jpg
2dfern13_small.jpg
2dfern2.jpg
2dfern2_small.jpg
2dfern3.jpg
2dfern3_small.jpg
2dfern4.jpg
2dfern4_small.jpg
2dfern5.jpg
2dfern5_small.jpg
2dfern6.jpg
2dfern6_small.jpg
2dfern7.jpg
2dfern7_small.jpg
2dfern8.jpg
2dfern8_small.jpg
2dfern9.jpg
2dfern9_small.jpg
2dgrassgroup1.jpg
2dgrassgroup1_small.jpg
2dgrassgroup2.jpg
2dgrassgroup2_small.jpg
2dmatte.jpg
2dmatte_small.jpg
2dundergrowth1.jpg
2dundergrowth1_small.jpg
2dundergrowth2.jpg
2dundergrowth2_small.jpg
foregroundfern1.jpg
foregroundfern1_small.jpg
foregroundfern2.jpg
foregroundfern2_small.jpg
foregroundfern3.jpg
foregroundfern3_small.jpg
grasspatch1.jpg
grasspatch1_small.jpg
grasspatch2.jpg
grasspatch2_small.jpg
groundcover1.jpg
groundcover1_small.jpg
groundcover2.jpg
groundcover2_small.jpg
groundcover3.jpg
groundcover3_small.jpg
groundcover4.jpg
groundcover4_small.jpg
groundcover5.jpg
groundcover5_small.jpg
middlegroundfern1.jpg
middlegroundfern1_small.jpg
middlegroundfern2.jpg
middlegroundfern2_small.jpg
middlegroundfern3.jpg
middlegroundfern3_small.jpg

\Tutorials\Masters Series\Smoke n Mirrors\files\bryce

01_addheight.jpg
02_parallellights.jpg
03_slope.jpg
04_gaps.jpg
05_alphapatches.jpg
06_dupescene.jpg
07_spotlights.jpg
08_halo.jpg
09_nohalo.jpg
10_masks.jpg
11_batchrendering.jpg

\Tutorials\Masters Series\Smoke n Mirrors\files\compositing1

01_loadmasks.jpg
02_problem1.jpg
03_problem2.jpg
04_lightrectangles.jpg
05_blur.jpg
06_deform.jpg
07_finallights.jpg
08_beamsright.jpg
09_beamswrong.jpg
10_layers.jpg
11_dodgeburn.jpg
12_overdo.jpg

\Tutorials\Masters Series\Smoke n Mirrors\files\compositing2

01_cloakredo.jpg
02_boromirjerkin.jpg
03_contrast1.jpg
04_edgecleanup.jpg
05_defineleaves.jpg
06_cleanup.jpg
07_contrast2.jpg
08_merge.jpg
09_hair.jpg
10_filter.jpg
11_final.jpg

\Tutorials\Masters Series\Smoke n Mirrors\files\humanhobbit

01_jackettex.jpg
02_jacketbump.jpg
03_pantstex.jpg
04_Pippin.jpg
05_PippinFinal.jpg
06_PippinPlace.jpg
07_NordicHeadM3.jpg
08_NordicBodyM3.jpg
09_Boromir.jpg
10_BoromirFinal.jpg
11_BoromirPlace.jpg

\Tutorials\Masters Series\Smoke n Mirrors\files\intro

01_smokemirrors.jpg

\Tutorials\Masters Series\Smoke n Mirrors\files\orcs

01_Orcs_Group1.jpg
02_Orcs_Group2.jpg
03_Orcs_Group3.jpg
04_Orcs01_Place.jpg
05_Orcs02_Place.jpg
06_Orcs03_Place.jpg
07_DeadOrc01.jpg
08_DeadOrc02.jpg
09_DeadOrc03.jpg
10_Orc8Pose5.jpg
11_Orc9Pose6.jpg

\Tutorials\Masters Series\Smoke n Mirrors\files\poser

01_backdrop.jpg
02_memorydot.jpg
03_pointat.jpg
04_groupings.jpg
05_droptofloor.jpg
06_export.jpg

\Tutorials\Masters Series\Smoke n Mirrors\files\prep

01_sketch01.jpg
02_poser4lo.jpg
03_extmorph1.jpg
04_comparea.jpg
05_fewerpolys.jpg
06_checkpolys.jpg
07_backdrops.jpg
08_masterlighting.jpg
09_preview.jpg

\Content

\Content\Masters Series

\Content\Masters Series\Smoke n Mirrors

Basic Scene Foundation.br5
Smoke Mirrors.bsk
LightBeams.psd
Weave.psd
Main_Tree_Scene.pz3

\Content

\Content\Masters Series

\Content\Masters Series\Smoke n Mirrors

Basic Scene Finished 01.br5
Scene_README.txt

\Content

\Content\Masters Series

\Content\Masters Series\Smoke n Mirrors

Basic Scene Finished 02.br5

\Content

\Content\Masters Series

\Content\Masters Series\Smoke n Mirrors

Basic Scene Finished 03.br5

\Presets

\Presets\Materials

\Presets\Materials\Master Series

Smoke Mirrors.mat

\Presets\Objects

\Presets\Objects\Masters Series

Smoke Mirrors 1.obp
Smoke Mirrors 2.obp
Smoke Mirrors 3.obp

\Runtime

\Runtime\Geometries

\Runtime\Geometries\MastersSeries

\Runtime\Geometries\MastersSeries\SmokeMirrors

boromirsword.obj
orcarrow.obj
simpleaxe1.obj
simplebow1.obj
simplehelmet1.obj
simplehelmet2.obj
simplehelmet3.obj
simplehelmet4.obj
simplehelmet5.obj
simplepike1.obj
simpleshield1.obj
simpleshield2.obj
simplespear1.obj
simplesword.obj

\Runtime\libraries

\Runtime\libraries\Camera

\Runtime\libraries\Camera\Smoke n Mirrors

Boromir Camera.cm2
Boromir Camera.rsr

\Runtime\libraries\Character

\Runtime\libraries\Character\Smoke n Mirrors

Boromir Beard.cr2
Boromir Belt.cr2
Boromir Bracers.cr2
Boromir Cloak.cr2
Boromir Duster.cr2
Boromir L Boot.cr2
Boromir Pants.cr2
Boromir R Boot.cr2
Boromir Tunic.cr2
Boromir.cr2
LoRes Orc P4.cr2
LoRes Orc PP56.cr2
Pippin Cloak.cr2
Boromir Beard.rsr
Boromir Belt.rsr
Boromir Bracers.rsr
Boromir Cloak.rsr
Boromir Duster.rsr
Boromir L Boot.rsr
Boromir Pants.rsr
Boromir R Boot.rsr
Boromir Tunic.rsr
Boromir.rsr
LoRes Orc P4.rsr
LoRes Orc PP56.rsr
Pippin Cloak.rsr

\Runtime\libraries\Hair

\Runtime\libraries\Hair\Smoke n Mirrors

Boromir Hair.hr2
Pippin Hair.hr2
Boromir Hair.rsr
Pippin Hair.rsr

\Runtime\libraries\Pose

\Runtime\libraries\Pose\SM Injections

BoromirINJ.pz2
BoromirREM.pz2
PippinINJ.pz2
PippinREM.pz2
BoromirINJ.rsr
BoromirREM.rsr
PippinINJ.rsr
PippinREM.rsr

\Runtime\libraries\Pose\SM MATs P4

Boromir Beard MAT.pz2
Boromir Belt MAT.pz2
Boromir Bracers MAT.pz2
Boromir Cloak MAT.pz2
Boromir Duster MAT.pz2
Boromir Gloves MAT.pz2
Boromir Hair MAT.pz2
Boromir L Boot MAT.pz2
Boromir Pants MAT.pz2
Boromir R Boot MAT.pz2
Pippin Cloak MAT.pz2
Boromir Beard MAT.rsr
Boromir Belt MAT.rsr
Boromir Bracers MAT.rsr
Boromir Cloak MAT.rsr
Boromir Duster MAT.rsr
Boromir Gloves MAT.rsr
Boromir Hair MAT.rsr
Boromir L Boot MAT.rsr
Boromir Pants MAT.rsr
Boromir R Boot MAT.rsr
Pippin Cloak MAT.rsr

\Runtime\libraries\Pose\SM MATs PP56

Boromir Beard MAT.png
Boromir Belt MAT.png
Boromir Bracers MAT.png
Boromir Cloak MAT.png
Boromir Duster MAT.png
Boromir Gloves MAT.png
Boromir Hair MAT.png
Boromir L Boot MAT.png
Boromir Pants MAT.png
Boromir R Boot MAT.png
Boromir Tunic MAT.png
Pippin Cloak MAT.png
Boromir Beard MAT.pz2
Boromir Belt MAT.pz2
Boromir Bracers MAT.pz2
Boromir Cloak MAT.pz2
Boromir Duster MAT.pz2
Boromir Gloves MAT.pz2
Boromir Hair MAT.pz2
Boromir L Boot MAT.pz2
Boromir Pants MAT.pz2
Boromir R Boot MAT.pz2
Boromir Tunic MAT.pz2
Pippin Cloak MAT.pz2

\Runtime\libraries\Pose\SM MOR Files

Boromir Hair MOR.pz2
Boromir LBoot MOR.pz2
Boromir Pants MOR.pz2
Boromir RBoot MOR.pz2
Pippin Hair MOR.pz2
Pippin MOR.pz2
Boromir Hair MOR.rsr
Boromir LBoot MOR.rsr
Boromir Pants MOR.rsr
Boromir RBoot MOR.rsr
Pippin Hair MOR.rsr
Pippin MOR.rsr

\Runtime\libraries\Pose\SM Poses

Boromir Cloak.pz2
Boromir Duster.pz2
Boromir.pz2
Lo_Orc_01.pz2
Lo_Orc_02.pz2
Lo_Orc_03.pz2
Lo_Orc_04.pz2
Lo_Orc_05.pz2
Lo_Orc_06.pz2
Lo_Orc_07.pz2
Lo_Orc_08.pz2
Lo_Orc_09.pz2
Lo_Orc_10.pz2
Lo_Orc_11.pz2
Lo_Orc_12.pz2
Lo_Orc_13.pz2
Lo_Orc_14.pz2
Lo_Orc_15.pz2
Lo_Orc_16.pz2
Lo_Orc_17.pz2
Pippin Cloak.pz2
Pippin.pz2
Boromir Cloak.rsr
Boromir Duster.rsr
Boromir.rsr
Lo_Orc_01.rsr
Lo_Orc_02.rsr
Lo_Orc_03.rsr
Lo_Orc_04.rsr
Lo_Orc_05.rsr
Lo_Orc_06.rsr
Lo_Orc_07.rsr
Lo_Orc_08.rsr
Lo_Orc_09.rsr
Lo_Orc_10.rsr
Lo_Orc_11.rsr
Lo_Orc_12.rsr
Lo_Orc_13.rsr
Lo_Orc_14.rsr
Lo_Orc_15.rsr
Lo_Orc_16.rsr
Lo_Orc_17.rsr
Pippin Cloak.rsr
Pippin.rsr

\Runtime\libraries\Props

\Runtime\libraries\Props\SM Props P4

Boromir Sword.pp2
Hobbit Sword.pp2
Orc Arrow.pp2
Orc Bow.pp2
Orc Helm 1.pp2
Orc Helmet 1.pp2
Orc Helmet 2.pp2
Orc Long Axe.pp2
Orc Pike 1.pp2
Orc Shield 1.pp2
Orc Shield 2.pp2
Orc Spear.pp2
Orc Sword.pp2
Boromir Sword.rsr
Hobbit Sword.rsr
Orc Arrow.rsr
Orc Bow.rsr
Orc Helm 1.rsr
Orc Helmet 1.rsr
Orc Helmet 2.rsr
Orc Long Axe.rsr
Orc Pike 1.rsr
Orc Shield 1.rsr
Orc Shield 2.rsr
Orc Spear.rsr
Orc Sword.rsr

\Runtime\libraries\Props\SM Props PP56

Boromir Sword.png
Hobbit Sword.png
Orc Arrow.png
Orc Bow.png
Orc Helm 1.png
Orc Helmet 1.png
Orc Helmet 2.png
Orc Long Axe.png
Orc Pike 1.png
Orc Shield 1.png
Orc Shield 2.png
Orc Spear.png
Orc Sword.png
Boromir Sword.pp2
Hobbit Sword.pp2
Orc Arrow.pp2
Orc Bow.pp2
Orc Helm 1.pp2
Orc Helmet 1.pp2
Orc Helmet 2.pp2
Orc Long Axe.pp2
Orc Pike 1.pp2
Orc Shield 1.pp2
Orc Shield 2.pp2
Orc Spear.pp2
Orc Sword.pp2

\Runtime\Textures

\Runtime\Textures\MastersSeries

\Runtime\Textures\MastersSeries\SmokeMirrors

boromir_gloves.jpg
boromir_gloves_bump.jpg
boromirBelt.jpg
boromirBelt_bump.jpg
boromirbracers_bump.jpg
boromirbracers_texture.jpg
boromircloak.jpg
boromirduster_bump.jpg
boromirLBoot_bump.jpg
boromirLBoot_texture.jpg
boromirpants.jpg
boromirpants_bump.jpg
boromirRBoot_bump.jpg
boromirRBoot_texture.jpg
boromirtunic.jpg
boromirtunic_bump2.jpg
bsword_bump.jpg
bsword_texture.jpg
CloakBump.jpg
CloakTexture.jpg
dustera.jpg
dustertrans.jpg
forestfloor.jpg
forestfloor_bump.jpg
hobbit_pant_trans_1.jpg
HobbitSword1Bump.jpg
HobbitSword1Texture.jpg
orcarrow_bump.jpg
orcarrow_texture.jpg
orcarrow_trans.jpg
orchelm1_bump.jpg
orchelm1_texture.jpg
orchelm4_bump.jpg
orchelm4_texture.jpg
orchelm4_trans.jpg
OrcP4Lo.jpg
OrcP4Lo_bump.jpg
simpleaxe_bump.jpg
simpleaxe_texture.jpg
simplebow_bump.jpg
simplebow_texture.jpg
simplehelmet1_bump.jpg
simplehelmet1_texture.jpg
simplepike1_bump.jpg
simplepike1_texture.jpg
simpleshield_bump.jpg
simpleshield_texture.jpg
simpleshield2_bump.jpg
simpleshield2_texture.jpg
simplespear_bump.jpg
simplespear_texture.jpg
simplesword_bump.jpg
simplesword_texture.jpg
treeroot1_bump.jpg
treeroot1_texture.jpg

Bryce Masters Series: The Block

image_medium.jpg

Product: The Block Masters Series Tutorial
Product Code: br_sc014
DAZ Original: YES
Created By: Rudolf Herzog
Released: December 21, 2005



Product Information
* Required Products: Bryce 5
* You can find the tutorial in the following folder(s):
* Tutorials:Masters Series:The Block
* Support files (materials, objects) are located in the following folders:
* Materials - Content:Masters Series:The Block:Materials
* Objects - Content:Masters Series:The Block:Objects
* Skies - Content:Masters Series:The Block
* Scene - Content:Masters Series:The Block:Scene Files


Product Notes
* To access the tutorial, open the Index.html page located in the Bryce 5:Tutorials:Masters Series:The Block folder.
* If you installed the tutorial directly into your Bryce 5 program folder, the materials and objects are all located in the

Content:Masters Series:The Block, then in the Materials and Objects folders, ready to import and examine. The materials and objects are

not installed to the Preset libraries because of having to split them up for easier download, however, a blank library is available in

both the Objects and Materials Libraries under “Masters Series.”
* The sky will need to be manually imported into the Sky Library and are located in the Content:Masters Series:The Block folder.
* The complete scene file will need to be merged together if you want the full scene. Please be aware that the entire scene is

almost 482 MB in size so you may not be able to save the scene as one file.



* Files installed for this product:


\Content\Masters Series\The Block\
————————————— TheBlockSky.bsk
————————————— \Content\Masters Series\The Block\Materials\
————————————— The Block1.mat
The Block2.mat
The Block3.mat
The Block4.mat
————————————— \Content\Masters Series\The Block\Objects\Step 1\
————————————— LongBlock.obp
PavementPiece1.obp
PavementPiece2.obp
ShortBlock.obp
————————————— \Content\Masters Series\The Block\Objects\Step 2\
————————————— Window.obp


\Content\Masters Series\The Block\Objects\Step 3\
————————————— FireEscape.obp
————————————— \Content\Masters Series\The Block\Objects\Step 4\
————————————— Building1.obp
————————————— \Content\Masters Series\The Block\Objects\Step 5\
————————————— Building2.obp
Door.obp
————————————— \Content\Masters Series\The Block\Objects\Step 6\
————————————— Building3.obp
FuseBox.obp
Window.obp


\Content\Masters Series\The Block\Objects\Step 7\
————————————— Building4.obp
CinemaSign.obp
TheBlockSign.obp
————————————— \Content\Masters Series\The Block\Objects\Step 8\
————————————— Billboard1.obp
Billboard2.obp
HotelLetters.obp
HotelSignSupport.obp
StreetLamp.obp
————————————— \Content\Masters Series\The Block\Objects\Step 9\
————————————— AlleyGround.obp
Barriers_Bars.obp
Box.obp
Crosswalk.obp
ElectricWire.obp
Fence.obp
PavementMarkings.obp
RectangularSign.obp
RoundSign.obp
TrafficLight.obp
TrashCan1.obp
TrashCan2.obp
————————————— \Content\Masters Series\The Block\Objects\Step 10\
————————————— SkyBackdrop.obp
————————————— \Content\Masters Series\The Block\Scene Files\
————————————— Billboards1.br5
Billboards2.br5
Building1.br5
Building2A.br5
Building2B.br5
Building3A.br5
Building3B.br5
Building4.br5
Lamps.br5
Pavement.br5
StoreSignBar.br5
StoreSigns.br5
Trashcan3Fence.br5
Trashcans12.br5
WiresTrees.br5
————————————— \Content\Masters Series\The Block\Textures\
————————————— Clouds.jpg
Graffiti Transmap.jpg
Graffiti.jpg
Mikes Transmap.jpg
Mikes.jpg
Neo Transmap.jpg
Neo.jpg
Rudyns Boolean shop rustjpg.jpg Rudyns Boolean shop transmap.jpg RudysBase.jpg
RudysTrans.jpg
Theblock Transmap.jpg
Theblock.jpg
————————————— \Presets\Materials\Masters Series\
————————————— The Block.mat
————————————— \Presets\Objects\Masters Series\
————————————— The Block.obp
————————————— \Tutorials\Masters Series\The Block\
————————————— 00_Intro.html
01_Pavement.html
02_Windows.html
03_FireEscape.html
04_Building1.html
05_Building2.html
06_Building3.html
07_Building4.html
08_Billboard.html
09_Construction.html
10_Lighting.html
Index.html


\Tutorials\Masters Series\The Block\files\
————————————— tutorial.css
bio.html
00_abutton.jpg
00_ebutton.jpg
00_gbutton.jpg
00_mbutton.jpg
00_solomode.jpg
00_ubutton.jpg
ms_logo.jpg
————————————— \Tutorials\Masters Series\The Block\files\billboard\
————————————— 01_frame1.jpg
02_support.jpg
03_billboard1.jpg
04_billboard2.jpg
04_billboard2_sm.jpg
05_hotelsupport.jpg
06_corners.jpg
07_dupe.jpg
08_addtext.jpg
09_lampbase.jpg
10_basecap.jpg
11_post.jpg
12_top.jpg
12_top_sm.jpg
13_final.jpg
————————————— \Tutorials\Masters Series\The Block\files\bldg1\
————————————— 01_innercolumns.jpg
01_innercolumns_sm.jpg
02_outercolumn.jpg
02_outercolumn_sm.jpg
03_dupeouter.jpg
03_dupeouter_sm.jpg
04_frontwall.jpg
05_walltop.jpg
05_walltop_sm.jpg
06_walltopfront.jpg
06_walltopfront_sm.jpg
07_bldgfront.jpg
07_bldgfront_sm.jpg
08_sidewalls.jpg
08_sidewalls_sm.jpg
09_dupefront.jpg
09_dupefront_sm.jpg
10_sidepost.jpg
11_sidecutoff.jpg
12_sidepostfinal.jpg
13_dupepost.jpg
13_dupepost_sm.jpg
14_firstfloor.jpg
14_firstfloor_sm.jpg
15_ceiling.jpg
15_ceiling_sm.jpg
16_straighten.jpg
17_dooropening.jpg
17_dooropening_sm.jpg
18_underleftcyl.jpg
19_skew.jpg
19_skew_sm.jpg
20_straighten.jpg
20_straighten_sm.jpg
21_doorskewed.jpg
22_pastenegs.jpg
22_pastenegs_sm.jpg
23_dooredge.jpg
23_dooredge_sm.jpg
24_groupfirst.jpg
24_groupfirst_sm.jpg
25_doorglass.jpg
25_doorglass_sm.jpg
26_doorframe.jpg
26_doorframe_sm.jpg
27_finisheddoor.jpg
28_topfloorcutout.jpg
29_smallcube.jpg
30_rotate.jpg
31_duplicate.jpg
32_windows.jpg
33_groupfront.jpg
34_windowglass.jpg
35_result.jpg
36_roof.jpg
36_roof_sm.jpg
37_applymaterial.jpg
38_frontstep.jpg
39_final.jpg
————————————— \Tutorials\Masters Series\The Block\files\bldg2\
————————————— 01_start.jpg
01_start_sm.jpg
02_sides.jpg
02_sides_sm.jpg
03_duplicate.jpg
03_duplicate_sm.jpg
04_addsecond.jpg
04_addsecond_sm.jpg
05_secdetail.jpg
05_secdetail_sm.jpg
06_frontneg.jpg
06_frontneg_sm.jpg
07_dupeneg.jpg
08_neggroup.jpg
09_moredetail.jpg
09_moredetail_sm.jpg
10_addwindows.jpg
11_allwindows.jpg
11_allwindows_sm.jpg
12_winresult.jpg
12_winresult_sm.jpg
13_detailmat.jpg
13_detailmat_sml.jpg
14_bldgmat.jpg
14_bldgmat_sm.jpg
15_doors_sm.jpg
15_doorsneg.jpg
16_shopwin.jpg
17_door.jpg
18_doorglass.jpg
19_placedoor.jpg
19_placedoor_sm.jpg
20_garagedoor.jpg
20_garagedoor_sm.jpg
21_overhang.jpg
21_overhang_sm.jpg
22_cornerdetail.jpg
23_roof.jpg
24_final.jpg
24_final_sm.jpg
————————————— \Tutorials\Masters Series\The Block\files\bldg3\
————————————— 01_resizewin.jpg
01_resizewin_sm.jpg
02_winbars.jpg
02_winbars_sm.jpg
03_colcubes.jpg
04_fillgaps.jpg
05_porch.jpg
06_window.jpg
07_morewins.jpg
08_fusebox.jpg
09_bldgnumber.jpg
09_bldgnumber_sm.jpg
10_grafitti.jpg
10_grafitti_sm.jpg
11_finalbldg3.jpg
————————————— \Tutorials\Masters Series\The Block\files\bldg4\
————————————— 01_frontmain.jpg
02_frontdetail.jpg
03_sidecube.jpg
03_sidecube_sm.jpg
04_dupeup.jpg
05_afterdupe.jpg
06_groundside.jpg
06_groundside_sm.jpg
07_topsides.jpg
08_roof.jpg
09_steps.jpg
10_floor.jpg
11_door.jpg
11_door_sm.jpg
12_texture.jpg
13_marquee_sm.jpg
13_marquee1.jpg
14_cinema.jpg
14_cinema_sm.jpg
15_marquee2.jpg
15_marquee2_sm.jpg
16_texturem.jpg
17_theblock.jpg
17_theblock_sm.jpg
18_final.jpg
————————————— \Tutorials\Masters Series\The Block\files\construction\
————————————— 01_pavement.jpg
01_pavement_sm.jpg
02_bldg31.jpg
02_light1_sm.jpg
03_bldg32.jpg
03_light2_sm.jpg
04_bldg21.jpg
04_light3_sm.jpg
05_bldg22.jpg
05_light4_sm.jpg
06_bldg4.jpg
06_light5_sm.jpg
07_alley.jpg
07_light6_sm.jpg
08_alleywall.jpg
08_light7_sm.jpg
09_bldg1.jpg
09_light8_sm.jpg
10_fence.jpg
10_fence_sm.jpg
10_light9_sm.jpg
11_baseblock.jpg
11_baseblock_sm.jpg
11_light10_sm.jpg
12_selecttori.jpg
13_streetline.jpg
14_cuttorus.jpg
14_cuttorus_sm.jpg
15_group.jpg
15_group_sm.jpg
16_sideline.jpg
17_groupline.jpg
18_lineresult.jpg
19_alllines.jpg
20_alleywalls.jpg
21_afterlines.jpg
22_crosswalk.jpg
23_stairs.jpg
24_addprops.jpg
24_addprops_sm.jpg
————————————— \Tutorials\Masters Series\The Block\files\intro\
————————————— 01_block1.jpg
01_block1_sm.jpg
02_block2.jpg
02_block2_sm.jpg
————————————— \Tutorials\Masters Series\The Block\files\lights\
————————————— 01_template.jpg
02_light1.jpg
03_light2.jpg
04_light3.jpg
05_light4.jpg
06_light5.jpg
07_light6.jpg
08_light7.jpg
09_light8.jpg
10_light9.jpg
11_light10.jpg
————————————— \Tutorials\Masters Series\The Block\files\pavement\
————————————— 01_createcube.jpg
02_paving01.jpg
03_copypaving.jpg
04_multirep.jpg
05_multirep2.jpg
06_placecorner.jpg
07_cornerattrib.jpg
08_rotate.jpg
09_rotateattrib.jpg
10_cornerpiece.jpg
11_resizetorus.jpg
12_radius.jpg
13_lockcylinder.jpg
14_snaptogether.jpg
15_snapresult.jpg
16_toruspos.jpg
17_cornercutoff.jpg
18_cutoffside.jpg
18_torusattrib.jpg
19_cutoff2.jpg
20_cornergroup.jpg
21_cornerrender.jpg
21_cornerrender_sm.jpg
22_curb1.jpg
23_curbdupe.jpg
23_curbdupe_sm.jpg
24_curbrender.jpg
25_curb2.jpg
25_curb2_sm.jpg
26_placecurb2.jpg
26_placecurb2_sm.jpg
27_curb2attrib.jpg
28_curbrender.jpg
28_curbrender_sm.jpg
29_pavementgrp.jpg
30_cornermat.jpg
31_dupestraight.jpg
31_dupestraight_sm.jpg
32_dupecyl1.jpg
33_movecyl.jpg
34_result.jpg
35_movedupe1.jpg
36_movedupe2.jpg
37_groupdupe.jpg
38_flipz.jpg
39_movedupe3.jpg
40_movecorner.jpg
41_flipx.jpg
42_flippedgrp.jpg
43_moveddupe.jpg
44_deleteend.jpg
45_dupesides.jpg
46_dupecurb.jpg
47_movecurb.jpg
48_movecopy.jpg
49_dupeend.jpg
50_flipz.jpg
51_moveend.jpg
52_dupecurb.jpg
53_longblockfinal.jpg
54_final.jpg
54_longblock2.jpg
55_finished.jpg
56_selectfamily.jpg
————————————— \Tutorials\Masters Series\The Block\files\stairs\
————————————— 01_frames.jpg
02_platforms.jpg
03_edges.jpg
04_floorrods1.jpg
05_shortrods.jpg
06_grating.jpg
07_startsteps.jpg
08_11steps.jpg
09_steprender.jpg
10_railings.jpg
11_railings2.jpg
12_handrails.jpg
13_bolt.jpg
14_braces.jpg
15_copysteps.jpg
16_copylandings.jpg
17_ladder.jpg
18_final.jpg
————————————— \Tutorials\Masters Series\The Block\files\window\
————————————— 01_fourcones.jpg
02_placecube.jpg
02_placecube_sm.jpg
03_lineup.jpg
04_placecube2.jpg
04_placecube2_sm.jpg
05_cube2attrib.jpg
06_grating_sm.jpg
06_placeside.jpg
07_placeside2.jpg
07_placeside2_sm.jpg
07_startsteps_sm.jpg
08_11steps_sm.jpg
08_frontcutoff.jpg
08_frontcutoff_sm.jpg
09_bottomcutoff.jpg
09_steprender_sm.jpg
10_bottomcubeattrib.jpg
10_railings_sm.jpg
11_insidecones.jpg
11_insidecones_sm.jpg
11_railings2_sm.jpg
12_handrails_sm.jpg
12_insideconestop.jpg
13_braces_sm.jpg
13_grouped.jpg
14_innerframe.jpg
15_blinds.jpg
15_blinds_sm.jpg
16_finalwindow.jpg



Visit our site site for further technical support questions or concerns: www.daz3d.com/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
1350 E Draper Parkway
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787

TOLL-FREE 1-800-267-5170

Bryce Rustic Rocks

image_medium.jpg

Product: Rustic Rocks
Product Code: br_ob28b
Product Code old: br_fr011
DAZ Original: YES
Created By: Estevez
Released: April 4, 2006

Product Information

  • Required Products: Bryce 6.1
  • You can find new presets/files for Bryce in the following folder(s):
  • Content:Estevez:RusticRocks

Product Notes

To use these rocks:

  • Click on the triangle next to Create at the top of the Bryce Working Window
  • Select the library to import the rocks into
  • Click on Import at the bottom of the library
  • Navigate to the Content:Estevez:RusticRocks folder and select the RusticRocks1.obp file
  • Click on Import again and select the RusticRocks2.obp file

Support


Visit our site for further technical support questions or concerns:

http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787

TOLL-FREE 1-800-267-5170

File Listing

Rustic Rocks for Bryce



\Content\



\Content\Estevez\



\Content\Estevez\RusticRocks\


RusticRocks1.obp
RusticRocks2.obp

Bryce Terrain Sampler

image_medium.jpg

Product: Bryce Terrain Sampler
Product Code: br_tr004
DAZ Original: YES
Created By: Stephen Ray
Released: May 9, 2005

Product Information

  • Required Products: BRYCE 6.1
  • You can find new presets/files for Bryce in the following folder(s)
  • Presets:Materials:Stephen Ray
  • Content:Stephen Ray:Terrain Sampler
  • Skies:Stephen Ray

Product Notes

  • Import the skies by opening the Sky Library and clicking on Import. Navigate to the Skies:Stephen Ray folder, select the sky file,

and click on OK.

  • Because of the size of the terrains, they were not installed to the Objects Library as that would have placed only one or two of

them into each preset library. Instead, they can be found in the Content folder and imported via the Objects Library import function.

Support


Visit our site for further technical support questions or concerns:

http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787

TOLL-FREE 1-800-267-5170

File Listing


Stephen Ray's Terrain Sampler —————————————————————————————————- \Content\



\Content\Stephen Ray\



\Content\Stephen Ray\Terrain Sampler\


Crater Pool.obp
Distant Island.obp
Tile Terrains 4.obp
Tile Terrains 5.obp
Tile Terrains 6.obp
Tree & Terrain.obp
—————————————————————————————————- \Presets\



\Presets\Materials\



\Presets\Materials\Stephen Ray\


Terrain Sampler.mat
—————————————————————————————————- \Skies\



\Skies\Stephen Ray\


SRay Sky Sampler.bsk

Canyon Environment Project

image_medium.jpg

Product: Canyon Environment Project
Product Code: br_sc008
DAZ Original: Yes
Created By: MarioG
Released: May 21, 2005

Product Information

  • Required Products: Bryce 5 or higher
  • You can find new presets/files for Bryce in the following folder(s):
    • Scene Files:MarioG

Product Notes

  • Because of file size, the Canyon Environment Project scene file has been split into two scenes which need to be merged prior

to using. To do this, open the “Canyon Environment Project 1.br5” file, then choose “File:Merge” from the menu. Select the “Canyon

Environment Project 2.br5” file and click on Open. Save the file under a new name once both files have been merged into one file.

  • To use the scene, study how it was put together, how the rivers and waterfalls were made, how the placement and layering of

terrains affect the final composition, study the materials in the DTE to see how they work. Then put that knowledge to use in your own

scenes. Learn by studying how others did it!

  • This scene includes several different saved camera settings allowing you to zoom in on different areas of the scene. Use the

camera settings to study the scene or to zoom in on an area where you want to add figures or animals.

Support

Visit our site for further technical support questions or concerns: http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing

Canyon Environment Project

\Scene Files\MarioG\

Canyon Environment Project 1.br5
Canyon Environment Project 2.br5

Clay's Tree Presets

image_medium.jpg

Product: Clay's Tree Presets
Product Code: br_ob068
DAZ Original: Yes
Created By: Clay Hagebusch
Released: April 6, 2007

Product Information

  • Required Products: BRYCE 6.
  • You can find new presets/files for Bryce in the following folder(s):
  • Content:Clay Hagebusch:Preset Trees

Product Notes

  • To use these trees:
  • Copy the tree OBP files from the Content:Clay Hagebusch:Preset Trees folder
  • Navigate to the Bryce 6:Presets:Objects folder and create a new folder called “ClayH”
  • Paste the copied OBP files inside the new folder

OR

  • Open Bryce and access the Objects Library
  • Import the Tree OBP files into the library in any category you wish

Known Issues

  • None

Support

Visit our site for further technical support questions or concerns:

http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing


\Content
—————————————————————-


\Content\Clay Hagebusch\



\Content\Clay Hagebusch\Tree Presets
—————————————————————- Tree Presets 1.obp
Tree Presets 2.obp
Tree Presets 3.obp

Clay's Tree Presets 2

image_medium.jpg

Product: Clay's Tree Presets 2
Product Code: br_ob071
DAZ Original: YES
Created By: Clay Hagebusch
Released: April 24, 2007


Product Information

  • Required Products: BRYCE 6

Product Notes

* Notes from the artist:
* You can find new presets/files for Bryce in the following folder(s):
* Content:Clay Hagebusch:Preset Trees 2


* To use these trees:
* Copy the tree OBP files from the Content:Clay Hagebusch:Preset Trees folderNavigate to the Bryce 6:Presets:Objects folder and create a new folder called “ClayH” (if you already have a ClayH folder, just open it instead) Paste the copied OBP files inside the new folder
* (OBP files start with “4” so as not to overwrite the OBP files from the trees in the br_ob068 package) OROpen Bryce and access the Objects Library
* Import the Tree OBP files into the library in any category you wish

Resolved Issues

  • None

Known Issues

  • None

Support

Visit our site for further technical support questions or concerns: http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing


—————————————————————-
\Content\Clay Hagebusch\Tree Presets 2\
—————————————————————-
Tree Presets 4.obp
Tree Presets 5.obp
Tree Presets 6.obp

Digital Oddity

image_medium.jpg

Product: Digital Oddity
Product Code: br_ob005
DAZ Original: Yes
Created By: MatCreator
Released: May 8, 2005

Product Information

  • Required Products: BRYCE 6.1
  • You can find new presets for Bryce in the following folder(s):
    • Presets:Materials:MatCreator:DVibrance
    • Presets:Objects:MatCreator:0dd World

Product Notes

  • Once installed, the files will be available in the Material and Object Presets Libraries under the MatCreator sublibrary.

Support

Visit our site for further technical support questions or concerns: http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing

Digital Oddity

\Presets\Materials\MatCreator\

DVibrance.mat

\Presets\Objects\MatCreator\

0dd World.obp

Drag-Trike

image_medium.jpg

Product: Drag-Trike
Product Code: br_ob015
DAZ Original: YES
Created By: Phil Drawbridge
Released: August 17, 2005


Product Information

  • Required Products: BRYCE 5

Product Notes

* Notes from the artist:
* You can find new presets for Bryce in the following folder(s):
* Content:Phil Drawbridge:Drag-Trike


* To use this item, do the following:
* Open Bryce, then access the Objects Library.
* Select the sub-library where you want to import the ship and click on Import.
* Navigate to the folder listed above, select the Drag-Trike.obp, and click on Open.
* The ship will now be available in the library.

Resolved Issues

  • None

Known Issues

  • None

Support

Visit our site for further technical support questions or concerns: http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing


—————————————————————————————————-
\Content\Phil Drawbridge\Drag-Trike\
—————————————————————————————————-
Drag-Trike.obp

Dream Maker's Picturesque Landscapes

image_medium.jpg

Product: Dream Maker's Picturesque Landscapes
Product Code: br_sc006
DAZ Original: Yes
Created By: Dream Maker
Released: May 8, 2005

Product Information

  • Required Products: Bryce 5 or higher
  • You can find new presets/files for Bryce in the following folder(s):
    • Presets:Materials:Jonathan Cummings
    • Presets:Objects:Jonathan Cummings
    • Scene Files:Jonathan Cummings
    • Skies:Jonathan Cummings

Product Notes

  • Includes scene files to study, materials, islands, and skies.
  • The Materials and Objects can be found in the Materials and Objects Libraries under Jonathan Cummings.
  • The skies will need to be imported into the Sky Library by opening the Sky Library, selecting Import, then locating the sky

file in the Skies:Jonathan Cummings folder.

Support

Visit our site for further technical support questions or concerns: http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing

Dream Maker's Picturesque Landscapes

\Presets\Materials\Jonathan Cummings\

JACs Islands.mat

\Presets\Objects\Jonathan Cummings\

JACs Islands.obp

\Scene Files\Jonathan Cummings\

JAC Highlander Combo.bmp
JAC Journey Combo.bmp
JAC Mesa Combo.bmp
JAC Natural Amphitheater.bmp
JAC Pass Combo.bmp
JAC Slumber Combo.bmp
JAC Highlander Combo.br5
JAC Journey Combo.br5
JAC Mesa Combo.br5
JAC Natural Amphitheater.br5
JAC Pass Combo.br5
JAC Slumber Combo.br5

\Skies\Jonathan Cummings\

JACs Skies.bsk

EPIC SCIFI: Space Station Construction Kit

image_medium.jpg

Product: EPIC SCIFI: Space Station Construction Kit
Product Code: br_ob74
DAZ Original: YES
Created By: Mihnea
Released: July 26, 2007



Product Information
* Required Products: Bryce 6.1
* You can find new icons for loading this product in the following Libraries:
* Bryce Models: “Content/Mihnea Dumitru/EPIC/Models”
* Bryce Scenes: “Scene Files/Mihnea Dumitru”


Product Notes
The future awaits! The EPIC Sci-Fi series gives you modular designs fitting seamlessly into scenes, without you needing advanced

modeling or texturing knowledge to individually create them. Using this set is like playing with plastic building blocks, only in this

case, the pieces fit with any of the other ones in the set. This set gives you 46 high-quality building blocks to begin with, from

space station structures, gigantic city domes, pieces of gigantic starship hulls, and massive space buildings.

The collection is

made so that you only have to import a selected number of models, fit them together, and then hit render. There are many possibilities,

ranging from International Space Station look-alikes, to cities floating in the clouds, to the star bases in seen in blockbuster Sci-Fi

movies. The models are included in both native Bryce format, and as standard .obj files. Your imagination is the only limit.

Four

spectacular pre-created scenes are included, ranging from dangerous asteroid fields to icy-cold moonscapes. Use these scenes to create

your own Sci-Fi epic, or as an inspiration for your own unique far-future backdrops. Where will your imagination take you?

The

Space Station Construction Kit is designed to recreate almost any space age, regardless of the desired complexity. Rotate and resize to

fit or to add an extra level of randomness to your orbiting space station, or add a few close-up buildings to a beautiful space vista!



* Files installed for this product:


\Content\Mihnea Dumitru\EPIC\Models\


1.obp
10.obp
11.obp
12.obp
13.obp
14.obp
15.obp
16.obp
17.obp
18.obp
19.obp
2.obp
20.obp
21.obp
22.obp
23.obp
24.obp
25.obp
26.obp
27.obp
28.obp
29.obp
3.obp
30.obp
31.obp
32.obp
33.obp
34.obp
35.obp
36.obp
37.obp
38.obp
39.obp
4.obp
40.obp
41.obp
42.obp
43.obp
44.obp
45.obp
5.obp
6.obp
7.obp
8.obp
9.obp
m46.obp
————————————————– \Content\obj\
————————————————– 31_mtl1_bumpamt.bmp
31_mtl1_diffcol.bmp
1.mtl
10.mtl
11.mtl
12.mtl
13.mtl
14.mtl
15.mtl
16.mtl
17.mtl
18.mtl
19.mtl
2.mtl
20.mtl
21.mtl
22.mtl
23.mtl
24.mtl
25.mtl
26.mtl
27.mtl
28.mtl
29.mtl
3.mtl
30.mtl
31.mtl
32.mtl
33.mtl
34.mtl
35.mtl
36.mtl
37.mtl
38.mtl
39.mtl
4.mtl
40.mtl
41.mtl
42.mtl
43.mtl
44.mtl
45.Mtl
5.mtl
6.mtl
7.mtl
8.mtl
9.mtl
priam.Mtl
1.obj
10.obj
11.obj
12.obj
13.obj
14.obj
15.obj
16.obj
17.obj
18.obj
19.obj
2.obj
20.obj
21.obj
22.obj
23.obj
24.obj
25.obj
26.obj
27.obj
28.obj
29.obj
3.obj
30.obj
31.obj
32.obj
33.obj
34.obj
35.obj
36.obj
37.obj
38.obj
39.obj
4.obj
40.obj
41.obj
43.obj
44.obj
45.obj
5.obj
6.obj
7.obj
8.obj
9.obj
priam.obj
————————————————– \Content\Scene Files\Mihnea Dumitru\


scene1.br6
scene2.br6
scene3.br6
scene4.br6
————————————————– \Content\textures\
————————————————– al.jpg
default.jpg
lights.jpg



Visit our site for further technical support questions or concerns:

http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787

TOLL-FREE 1-800-267-5170

Flying Steamer

image_medium.jpg

Product: Flying Steamer
Product Code: br_ob091
DAZ Original: YES
Created By: Phillip Drawbridge
Released: 2009-01-30


Product Information

  • Required Products: Bryce 6.1

Product Notes

* Notes from the artist:
* You can find new icons for loading this product in the following Folders:
* “Content:Phillip Drawbridge:Flying Steamer”

Resolved Issues

  • None

Known Issues

  • None

Support

Visit our site for further technical support questions or concerns:

http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing


\Content\Phillip Drawbridge\Flying Steamer\flyingship.obp

Green Giant

image_medium.jpg

Product: Green Giant
Product Code: br_ob014
DAZ Original: YES
Created By: Phil Drawbridge
Released: August 15, 2005


Product Information

  • Required Products: BRYCE 5

Product Notes

* Notes from the artist:
* You can find new presets for Bryce in the following folder(s):
* Content:Phillip Drawbridge:Green Giant


* To use this item, do the following:
* Open Bryce, then access the Objects Library.
* Select the sub-library where you

want to import the ship and click in Import.
* Navigate to the folder listed above, select the GG_Transport.obp, and click on

Open.
* The vehicle will now be available in the library.

Resolved Issues

  • None

Known Issues

  • None

Support

Visit our site for further technical support questions or concerns:

http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing


—————————————————————————————————-
\Content\Phil Drawbridge\Green Giant\
—————————————————————————————————-
GG_Transport.obp

HG-1 Gunship

image_medium.jpg

Product: HG-1 Gunship
Product Code: br_ob073
DAZ Original: YES
Created By: Phillip Drawbridge
Released: August 3, 2007


Product Information

  • Required Products: Bryce 6.1

Product Notes

* Notes from the artist:
* You can find new presets/files for Bryce in the following folder(s):
* Content: “/Phillip_Drawbridge/H1G_Gunship/”

Resolved Issues

  • None

Known Issues

  • None

Support

Visit our site for further technical support questions or concerns: http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing


———————————————————————-
\Content\Phillip_Drawbridge\H1G_Gunship\
———————————————————————-
Hog.obp

Hilltop Design's Fractal Terrains

image_medium.jpg

Product: Steve Lareau's 12 Terrain Sampler
Product Code: br_tr003
DAZ Original: YES
Created By: Steve Lareau
Released: May 8, 2005


Product Information

  • Required Products: BRYCE 5

Product Notes

* Notes from the artist:
* You can find new presets for Bryce in the following folder(s):
* Presets:Objects:Steve Lareau

Resolved Issues

  • None

Known Issues

  • None

Support

Visit our site for further technical support questions or concerns: http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing


—————————————————————————————————-
\Presets\Objects\Steve Lareau\
—————————————————————————————————-
12 Terrain Sampler.obp

Karanta's 100 Sky Settings for Bryce 5

image_medium.jpg

Product: Karanta's 100 Sky Settings for Bryce 5
Product Code: br_sk003b
DAZ Original: YES
Created By: Karanta
Released: May 15, 2005


Product Information

  • Required Products: Bryce 5

Product Notes

* Notes from the artist:
* You can find new icons for loading this product in the following folder:
* Skies:Karanta


* To import your new sky settings please follow these instructions:
* Start Bryce
* Click in the menu on the little grey

arrow next to “Sky & Fog ”
* A new window pops up
* Click on “Import” and search on your HD for the file

“100BryceSkySettings_karanta”
* Click on OK


Artist's Acknowledgments:
I hope you have fun with your new sky settings!
Happy Rendering!
Kerstin (karanta)

Resolved Issues

  • None

Known Issues

  • None

Support

Visit our site for further technical support questions or concerns:

http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing


—————————————————————————————————-
\Skies\Karanta\
—————————————————————————————————-
100BryceSkySettings_karanta.bsk

Lighthouse

image_medium.jpg

Product: Lighthouse
Product Code: br_ob020b
DAZ Original: YES
Created By: Phil Drawbridge
Released: September 17, 2005


Product Information

  • Required Products: BRYCE 5.5

Product Notes

* Notes from the artist:
* You can find new presets for Bryce in the following folder(s):
* Content:Phil Drawbridge:Lightouse


* To use the lighthouse in Bryce:
* Open Bryce and access the Objects Library
* Select the sub-library to import the object into and click on Import
* Locate the Lighthouse.obp file in the directory listed above and click on Open
* The object will now be in the library ready to use
* To export the lighthouse:
* Load the lighthouse through the Objects Library
* Click on the E button next to the lighthouse object
* Press Ctrl-d
* Select the format to export as from the Save as type field
* Enter a filename in the File name field
* Click Save

Resolved Issues

  • None

Known Issues

  • None

Support

Visit our site for further technical support questions or concerns: http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing


—————————————————————————————————-
\Content\Phil Drawbridge\Lighthouse\
—————————————————————————————————-
Lighthouse.obp

Lise's Sky Collection Album 1

image_medium.jpg

Product: Lise's Sky Collection Album 1
Product Code: br_sk002
DAZ Original: Yes
Created By: Lise Sky
Released: May 9, 2005

Product Information

  • Required Products: BRYCE 6.1.
  • You can find new presets/files for Bryce in the following folder(s):
  • Skies:Lise Lebel

Product Notes

  • Once installed, you'll find the sky file inside the Skies:Lise Lebel folder.
  • To use the files, open the Sky Library, click on Import, then navigate to the Skies:Lise Lebel folder, select the sky file to

import, and click on OK.

Support

Visit our site for further technical support questions or concerns: http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing

Lise's Sky Collection Album 1

\Skies\Lise Lebel\

Lise's Sky Collect A1.bsk

Majestic Mountains

image_medium.jpg

Product: Majestic Mountains
Product Code: br_sc17b
DAZ Original: Yes
Created By: Estevez
Released: October 24, 2006

Product Information

  • Required Products: Bryce 6.1.
  • You can find new icons for loading this product in the following location:
    • \Content\Estevez\Majestic Mountains\Scene Files

Product Notes

  • These scenes are compatible with Bryce 5 and Bryce 6.

Note to Bryce 6 users

  • When opening the files, please set the Files of Type to Bryce 5 (.br5) or All files (.*) in order to see the files in the

browser window.

Support

Visit our site for further technical support questions or concerns: http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing

Majestic Mountains

\Content\Estevez\Majestic Mountains\Scene Files\

Atmosphere1_bonus.br5
Atmosphere2_bonus.br5
Atmosphere3_bonus.br5
Majestic_Mountains.br5

MAXDefault 2

image_medium.jpg

Product: MAXDefault 2
Product Code: br_li005
DAZ Original: Yes
Created By: draculaz
Released: March 27, 2007

Product Information

  • Required Products: Bryce 6.
  • You can find new presets for Bryce in the following folder(s):
  • Scene Files:MAXDefault2

Product Notes

  • Guidelines (maxdefault2_help.jpg) for adjusting the lights and placing objects within the light dome are available in the pics

folder of your ReadMe's folder.

Known Issues

  • None

Support

Visit our site for further technical support questions or concerns:

http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing


\Scene Files
—————————————————————-


\Scene Files\MAXDefault2\


maxdefault2.br6

N1-Interceptor

image_medium.jpg

Product: N1-INTERCEPTOR
Product Code: br_ob064b
DAZ Original: YES
Created By: Phil Drawbridge
Released: January 15, 2007

—-

Product Information
* Required Products: Bryce 5 or higher.
* You can find new presets/files for Bryce in the following folder(s):
* Content:Phil Drawbridge:N1-Interceptor

Product Notes
* To use this object, open Bryce 5 or higher, open the Objects Library and select a folder. Click on Import, navigate to the Bryce

Content folder, then to the Phil Drawbridge : N1-Interceptor folder. Select the OBP file and click on Open. The N1-Interceptor should

now be in your Objects Library, ready to add to your scene.


* Files installed for this product:


\Content\Phil Drawbridge\N1-Interceptor\


N1-Interceptor.obp



Visit our site site for further technical support questions or concerns: www.daz3d.com/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
1350 E Draper Parkway
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787

TOLL-FREE 1-800-267-5170

Ocean Floors

med_popup_1.jpg

Product: Ocean Floors
Product Code: br_tr005
DAZ Original: Yes
Created By: Karanta
Released: May 26, 2005

Product Information

  • Required Products: Bryce 5 or higher
  • You can find new presets/files for Bryce in the following folder(s):
    • Content:Karanta:Ocean Floors

Product Notes

  • To import your new terrains, please follow these instructions.
    • Start Bryce:
      • Click in the menu on the little grey arrow next to “Create”
      • A new window pops up * Click on “Import” and find the file “Ocean Floors.obp” in the folder listed above
      • Select the file then click on OK.
    • Alternately, you can copy the Karanta folder and paste it directly into the Bryce 5.5:Presets:Objects folder, then

open Bryce and access the files through the Objects Library.

  • To import your new materials, please follow these instructions.
    • Start Bryce:
      • Click in the menu on the little grey arrow next to “Edit”.
      • A new window pops up * Click on “Import” and find the file “Ocean Floors.mat” in the folder listed above.
      • Select the file then click on OK.
      • Alternately, you can copy the Materials folder and paste it directly into the Bryce 5.5:Presets folder, then

open Bryce and access the files through the Materials Library.

  • Please note that the materials shown in the main promo image on the product page are not included in this package.
  • Included materials by CatBird Studios for DAZ.

Support

Visit our site for further technical support questions or concerns: http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing

Ocean Floors

\Content\DAZ Content\Materials\Terrains\

Ocean Floors.mat

\Content\Karanta\Ocean Floors\

Ocean Floors.obp

Pausanias Cruiser

image_medium.jpg

Product: Pausanias Cruiser
Product Code: br_ob009b
DAZ Original: YES
Created By: Phil Drawbridge
Released: July 17, 2005


Product Information

  • Required Products: BRYCE 5

Product Notes

* Notes from the artist:
* You can find new presets/files for Bryce in the following folder(s):
* Content:Phil Drawbridge:Pausanias


* To use this item, do the following:
* Open Bryce, then access the Objects Library.
* Select the sub-library where you want to import the ship and click in Import.
* Navigate to the folder listed above, select the PausaniasCruiser.obp, and click on Open.
* The ship will now be available in the library.

Resolved Issues

  • None

Known Issues

  • None

Support

Visit our site for further technical support questions or concerns: http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing


—————————————————————————————————-
\Content\Phil Drawbridge\Pausanias\
—————————————————————————————————-
PausaniasCruiser.obp

Planet Scapes

image_medium.jpg

Product: Planet Scapes
Product Code: br_tr007
DAZ Original: Yes
Created By: Karanta
Released: May 26, 2005

Product Information

  • Required Products: Bryce 5 or higher
  • You can find new presets/files for Bryce in the following folder(s):
    • Content:Karanta:Planet Scapes * Content:DAZ Content:Materials:Terrains

Product Notes

  • To import your new terrains, please follow these instructions.
    • Start Bryce:
      • Click in the menu on the little grey arrow next to “Create”
      • A new window pops up.
      • Click on “Import” and find the file “Planet Scapes.obp” in the folder listed above.
      • Select the file then click on OK.
    • Alternately, you can copy the Karanta folder and paste it directly into the Bryce 5.5:Presets:Objects folder, then

open Bryce and access the files through the Objects Library.

  • To import your new materials, please follow these instructions:
    • Start Bryce.
      • Click in the menu on the little grey arrow next to “Edit”.
      • A new window pops up * Click on “Import” and find the file “Planet Scapes.mat” in the folder listed above.
      • Select the file then click on OK.
      • Alternately, you can copy the Materials folder and paste it directly into the Bryce 5.5:Presets folder, then

open Bryce and access the files through the Materials Library.

  • Please note that the materials shown in the main promo image on the product page are not included in this package.
  • Included materials by CatBird Studios for DAZ.

Support

Visit our site for further technical support questions or concerns: http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing

Planet Scapes

\Content\DAZ Content\Materials\Terrains\

Planet Scapes.mat

\Content\Karanta\Planet Scapes\

Planet Scapes.obp

Power 2D

image_medium.jpg

  • Product: Power 2D
  • Product Code: br_ob061 (formerly br_ob036)
  • DAZ Original: YES
  • Created By: Jonathan Allen Cummings
  • Released: Dec 2, 2006

Product Information

Required Products: BRYCE 5 or above.

Folders: You can find new presets/files for Bryce in the following folder(s):

  • Content:JAC:Power 2D

View files installed for this product: Power2D_LIST



Product Notes

To use these presets:

  • Navigate to the Content:JAC:Power 2D folder, select the OBP file, and copy them
  • Navigate to the Bryce Presets:Objects folder and create a new folder called “JAC”
  • Paste the copied OBP file into the new folder

The objects will be available in your Object Presets library

Resolved Issues

Known Issues

Support


Visit our site for further technical support questions or concerns:

http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777

FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File List

Power Parts

image_medium.jpg

Product: Power Parts
Product Code: br_sc023
DAZ Original: YES
Created By: Jonathan Cummings
Released: December 18, 2006


Product Information

  • Required Products: BRYCE 5 or above

Product Notes

* Notes from the artist:
* You can find new presets/files for Bryce in the following folder(s):
* Content:JAC:Power Parts


* To use these scene files:
* Open Bryce, choose File > Open from the menu, navigate to the Content:JAC:Power Parts folder, select one of the Bryce scene files, and click on Open.

Resolved Issues

  • None

Known Issues

  • None

Support

Visit our site for further technical support questions or concerns: http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing


————————————————–
\Content\JAC\Power Parts\
————————————————–
Power Parts-1.br5
Power Parts-2.br5
Power Parts-3.br5
Power Parts-4a.br5
Power Parts-4b.br5

Psi City Sampler & SignMan 12

image_medium.jpg

Product: Psi City Sampler & SignMan 12
Product Code: br_ob040
DAZ Original: Yes
Created By: Simon A. Schild
Released: March 7, 2007

Product Information

  • Required Products: Bryce 5.5 or 6.
  • You can find new presets/files for Bryce in the following folder(s):
    • Content:Simon Schild:PSI City Sampler

Product Notes

  • To use the objects, do the following:
    • Navigate to the Bryce 6:Presets:Objects folder and create a new folder called “Simon Schild”
    • Copy the OBP files from the PSI City Sampler folder
    • Paste inside theBryce 6:Presets:Objects:Simon Schild folder * OR * Import each OBP file into any Object Library in

Bryce

Support

Visit our site for further technical support questions or concerns: http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing

Psi City Sampler & SignMan 12

\Content\Simon Schild\Psi City Sampler\

PsiCitySampler.obp
SignManSet1.obp
SignManSet2.obp

Quad Racer

image_medium.jpg

Product: Quad Racer
DAZ Original: YES
Created By: Phillip Drawbridge
Released: 2008-06-30


Product Information

  • Required Products: Carrara 6.2 - Download Version, Carrara 3D Express - Download Version, Bryce 6.1

Product Notes

* Notes from the artist:

You can find new icons for loading this product in the following Carrara Folders:
Presets: “Objects\Vehicles\Quad Racer”
You can find new icons for loading this product in the following Bryce Folders:
DAZ\Objects\Quad Racer”


Carrara Notes:
To add this product into the Carrara Browser
Go to the Objects tab of the Browser
On the far right of the browser click the Black Icon
Choose Add Folder
Browse to Presets:Objects:Vehicles
Hit OK
Any future vehicles that are set up as subfolders within Presets:Objects:Vehicles, whether you do it or an installer does, will be

added automatically.
To use this Object in Carrara simply Drag and drop from the Objects Tab either to the Instance Tab or into the Assembly room window.


Bryce Notes:
To install this product into Bryce
Click on the triangle next to Create
Choose an appropiate category or use the button to create one
Choose Import
Browse to the Content:DAZ:Objects:Quad Racer folder
Choose the QuadRacer.obp
You can now choose the Quad Racer from your Content Browser use it in Bryce

Resolved Issues

  • None

Known Issues

  • None

Support

Visit our site for further technical support questions or concerns:

http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing


\Content\DAZ\Objects\Quad Racer\QuadRacer.obp
\Presets\Objects\Vehicles\Quad Racer\quadcar5.car
\Quad Racer OBJ\Quad.mtl
\Quad Racer OBJ\Quad.obj

Realistic Leaves for Bryce

image_medium.jpg

Product: Realistic Leaves
Product Code: br_ma026
DAZ Original: YES
Created By: Angel Estevez
Released: March 19, 2006

Product Information

  • Required Products: Bryce 6.1
  • You can find new presets/files for Bryce in the following folder(s):
  • Content:Estevez:RealisticLeaves:Materials
  • Scene Files:Estevez

Product Notes

To use these leaves:

  • Open Bryce 5 or above
  • Import the leaves (leaves.mat file) into Bryce.
  • Create a new tree in the Tree Lab (use the “create tree” icon) or load a saved tree.
  • After loaded click in the “E” (Edit) in your tree.
  • In the area “Tree Lab” : “Foliage/Shape”, choose “user leaf”.
  • Click in “Edit” : “Material”. A leaf should show up.
  • Click in the arrow situated above and to the right of the leave that shows up.
  • Browse the leaves that you imported before; select one of them and click OK.
  • It is done! Your tree will be rendered with the selected leaves.

Support


Visit our site for further technical support questions or concerns:

http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787

TOLL-FREE 1-800-267-5170

File Listing


Realistic Leaves for Bryce



\Content\



\Content\Estevez\



\Content\Estevez\RealisticLeaves\


RealLeaves.mat
————————————————————————— \Scene Files\



\Scene Files\Estevez\


BonusScene_RL.br5

Sea Scapes: Bryce Rocks and Lattices

image_medium.jpg

Product: Sea Scapes:Bryce Rocks and Lattices
Product Code: br_ob070
DAZ Original: Yes
Created By: Clay
Released: April 10, 2007

Product Information

  • Required Products: Bryce 6.1
  • You can find new icons for loading this product in the following Libraries:
  • “Content\Clay Hagebusch\Lattice Rocks”
  • “Content\Clay Hagebusch\Regular Rocks”
  • “Content\Clay Hagebusch\Rocks-objs”

Product Notes

  • Various lattice and rock structures with custom bryce made materials for use in scenes from underwater, mountainous or desert. You

can combine these rock shapes to for super structures as well.

  • To install, simply open the create palette and click import, find the “Lattice Rocks.obp” file and/or the “Regular Rocks.obp” then

click ok.

Known Issues

  • None

Support

Visit our site for further technical support questions or concerns:

http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing


\Content\Clay Hagebusch\Lattice Rocks\


alien rock1.jpg
alien rock2.jpg
alien rock3.jpg
alien rock4.jpg
cracked rock1.jpg
cracked rock2.jpg
cracked rock3.jpg
cracked rock4.jpg
desert rock1.jpg
desert rock3.jpg
desertrock2.jpg
desrt rock4.jpg
lava rock1.jpg
lava rock2.jpg
lava rock3.jpg
lava rock4.jpg
lava rock5.jpg
mt rock1.jpg
mt rock2.jpg
mt rock3.jpg
mt rock4.jpg
ocean rock1.jpg
ocean rock2.jpg
ocean rock3.jpg
ocean rock4.jpg
ocean rock5.jpg
rock sample.jpg
water rock1.jpg
water rock2.jpg
water rock3.jpg
water rock4.jpg
Lattice Rocks.obp


\Content\Clay Hagebusch\Regular Rocks\


rock1.jpg
rock10.jpg
rock11.jpg
rock12.jpg
rock13.jpg
rock14.jpg
rock15.jpg
rock16.jpg
rock17.jpg
rock18.jpg
rock19.jpg
rock2.jpg
rock20.jpg
rock3.jpg
rock4.jpg
rock5.jpg
rock6.jpg
rock7.jpg
rock8.jpg
rock9.jpg
tonsofrocks.jpg
Regular Rocks.obp


\Content\Clay Hagebusch\Regular Rocks\Promo renders\


boulders.jpg
desert.jpg
underwater.jpg


\Content\Clay Hagebusch\Rocks-objs


alien rock1.obj
alien rock2.obj
alien rock3.obj
alien rock4.obj
cracked rock1.obj
cracked rock2.obj
cracked rock3.obj
cracked rock4.obj
desrt rock1.obj
desrt rock2.obj
desrt rock3.obj
desrt rock4.obj
lava rock1.obj
lava rock2.obj
lava rock3.obj
lava rock4.obj
lava rock5.obj
mt rock1.obj
mt rock2.obj
mt rock3.obj
mt rock4.obj
ocean rock1.obj
ocean rock2.obj
ocean rock4.obj
ocean rock5.obj
water rock1.obj
water rock2.obj
water rock3.obj
water rock4.obj

Seriously Real Materials (Vol. 1-2)

image_medium.jpg

Product: Seriously Real Materials (Vol. 1-2)
DAZ Original: YES
Created By: Jonathan Allen
Released: May 5, 2005


Product Information

  • Required Products: BRYCE 5

Product Notes

* Notes from the artist:

You can find new presets for Bryce in the following folder(s):
Content:DAZ Content:Materials:Jonathan Allen


Once installed, you can import the materials into your Materials Library or copy the Jonathan Allen folder and paste it directly

into the Presets:Materials folder.

Resolved Issues

  • None

Known Issues

  • None

Support

Visit our site for further technical support questions or concerns:

http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing


—————————————————————————————————-
\Content\DAZ Content\Materials\Jonathan Allen\
—————————————————————————————————-
Dried Mud.mat
Ground Cover2.mat

Seriously Real Materials (Vol. 3-4)

image_medium.jpg

Product: Seriously Real Materials (Vol. 3-4)
DAZ Original: YES
Created By: Jonathan Allen
Released: May 5, 2005


Product Information

  • Required Products: BRYCE 5

Product Notes

* Notes from the artist:

You can find new presets for Bryce in the following folder(s):
Content:DAZ Content:Materials:Jonathan Allen


Once installed, you can import the materials into your Materials Library or copy the Jonathan Allen folder and paste it directly

into the Presets:Materials folder.

Resolved Issues

  • None

Known Issues

  • None

Support

Visit our site for further technical support questions or concerns:

http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing


—————————————————————————————————-
\Content\DAZ Content\Materials\Jonathan Allen\
—————————————————————————————————-
Cold Desert.mat
Desert Sand.mat

Seriously Real Materials (Vol. 5-6)

image_medium.jpg

Product: Seriously Real Materials (Vol. 5-6)
DAZ Original: YES
Created By: Jonathan Allen
Released: May 5, 2005


Product Information

  • Required Products: BRYCE 5

Product Notes

* Notes from the artist:

You can find new presets for Bryce in the following folder(s):
Content:DAZ Content:Materials:Jonathan Allen


Once installed, you can import the materials into your Materials Library or copy the Jonathan Allen folder and paste it directly

into the Presets:Materials folder.

Resolved Issues

  • None

Known Issues

  • None

Support

Visit our site for further technical support questions or concerns:

http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing


—————————————————————————————————-
\Content\DAZ Content\Materials\Jonathan Allen\
—————————————————————————————————-
Arid Wastes.mat
Sandy Wastes.mat

Shadows Cottage

image_medium.jpg

Product: Shadows Cottage
Product Code: br_sc034b
DAZ Original: YES
Created By: Alan Armstrong
Released: April 11, 2008


Product Information

  • Required Products: Bryce 6.1

Product Notes

* Notes from the artist:
* You can find new presets/files for Bryce in the following folders:
* Content:Alan Armstrong:Shadows Cottage:Materials

* Content:Alan Armstrong:Shadows Cottage:Objects
* Content:Alan Armstrong:Shadows Cottage:Scene Files


* You can load the scene file as is
* To Import the Objects
* Open the Object palette by using the little arrow next to

create.
* Use the Plus button to add a directory, if desired
* Use the Import button and Browse to Content:Alan

Armstrong:Shadows Cottage:Objects
* Choose Shadows.obp
* Repeat for Shadows2.obp
* you an now choose the objects

you wish in your scene.
* To import the Materials
* Open the Material palette by using the little arrow next to Edit.

* Use the Import button and Browse to Content:Alan Armstrong:Shadows Cottage:Materials
* Choose Shadows.mat
* You can

now choose any of the materials to apply to your objects.

Resolved Issues

  • None

Known Issues

  • None

Support

Visit our site for further technical support questions or concerns:

http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing


—————————————————————————————————————————–
\Content\Alan Armstrong\Shadows Cottage\Materials\
—————————————————————————————————————————–
Shadows.mat
—————————————————————————————————————————–
\Content\Alan Armstrong\Shadows Cottage\Objects\
—————————————————————————————————————————–
Shadows.obp
Shadows2.obp
—————————————————————————————————————————–
\Content\Alan Armstrong\Shadows Cottage\Scene Files\
—————————————————————————————————————————–
ShadowsCottage.bmp
ShadowsCottage.br6

Solar Sail

image_medium.jpg

Product: Solar Sail
Product Code: br_ob038b
DAZ Original: NO
Created By: Phillip Drawbridge
Released: Jaunary 2, 2007



Product Information
* Required Products: BRYCE 5 or higher.
* You can find new presets/files for Bryce in the following folder(s):
* Content:Phil Drawbridge:Solar Sail


Product Notes
* To use this object, open Bryce 5 or higher, open the Objects Library and select a folder. Click on Import, navigate to the Bryce

Content folder, then to the hil Drawbridge : Solar Sail folder. Select the OBP file and click on Open. The Solar Sail should now be in

your Objects Library, ready to add to your scene.


* Files installed for this product:


\Content\Phil Drawbridge\Solar Sail\


SolarSail.obp



Visit our site site for further technical support questions or concerns: www.daz3d.com/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
1350 E Draper Parkway
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787

TOLL-FREE 1-800-267-5170

Space Station & Cargo Ship

image_medium.jpg

  • Product Code: br_ob011
  • DAZ Original: YES
  • Created By: Draculaz (Mihnea)
  • Released: August 15, 2005

Product Information

Required Products:

  • BRYCE 5 or higher

You can find new presets for Bryce in the following folder(s):

  • Content:draculaz:CargoShip_Station

View files installed for this product: CargoShipStation_LIST

Product Notes

To use these objects, load Bryce and click on the arrow next to the Create menu to open the Objects Library. Click on Import, then

navigate to the folder listed above, select either the Space Station or Cargo Ship OBP, and click on OK. Repeat to import the remaining

OBP.

Resolved Issues

Known Issues

Support


Visit our site for further technical support questions or concerns:

http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777

FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File List

Space Station & Cargo Ship
—————————————————————————————————-
—————————————————————————————————-
\Content\
—————————————————————————————————-
—————————————————————————————————-
\Content\draculaz\
—————————————————————————————————-
—————————————————————————————————-
\Content\draculaz\CargoShip_Station\
—————————————————————————————————-
FatsoCargoShip.obp
SpaceStation.obp

Stonehenge and Ruins

image_medium.jpg

Product: Stonehenge and Ruins
Product Code: br_ob006
DAZ Original: YES
Released: June 27, 2005

Product Information

You can find new icons for loading this product in the following Poser Libraries:

  • Props: “Stonehenge”

Product Notes

The full Stonehenge model can be resource intensive, so it has been broken up into smaller parts for rendering convenience.

Separate, individual pieces are also available so new stone circles can be created.

The ground circle in the full Stonehenge model may appear solid colored in the preview but it does render correctly.

The -P4 files are for Poser 4/Poser Artist only. All other versions of Poser and D|S can use the regular files. Note to P4 users:

Poser 4 users will need to convert several bump maps from .jpg files to use the P4 files properly.These Bump Map files are:

  • :DAZ:Stonehenge:sh_grey_rock1_bmp.jpg
  • :DAZ:Stonehenge:sh_grey_rock1_bmp1.jpg

Please see Bump Map Conversion Help for more instructions on converting Bump Files.

In all cases, “P4” will refer to Poser 4 and “PP” will refer to Pro Pak.

Support

Visit our site site for further technical support questions or concerns: www.daz3d.com/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
1350 E Draper Parkway
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787

TOLL-FREE 1-800-267-5170

File List

Stonehenge Poser version

\Runtime

\Runtime\Geometries\

\Runtime\Geometries\Daz_Props\

\Runtime\Geometries\Daz_Props\Daz_Buildings\

Arch1.obj
Arch2.obj
Arch3.obj
Arch4.obj
GroundCircleLarge.obj
InnerCircle.obj
OuterCircle.obj
OuterCircle1.obj
Rocks.obj
ruin.obj
StandingRock1.obj
StandingRock2.obj
StandingRock3.obj
ToppledStones.obj
TripleArch.obj

\Runtime\libraries

\Runtime\libraries\props

\Runtime\libraries\props\Stonehenge\

Arch1.pp2
Arch1P4.pp2
Arch2.pp2
Arch2P4.pp2
Arch3.pp2
Arch3P4.pp2
Arch4.pp2
Arch4P4.pp2
GroundCircle.pp2
InnerCircle.pp2
InnerCircleP4.pp2
OuterCircleFull.pp2
OuterCircleFullP4.pp2
OuterCircleMain.pp2
OuterCircleMainP4.pp2
Rocks.pp2
RocksP4.pp2
Ruins.pp2
RuinsP4.pp2
StandingRock1.pp2
StandingRock1P4.pp2
StandingRock2.pp2
StandingRock2P4.pp2
StandingRock3.pp2
StandingRock3P4.pp2
Stonehenge.pp2
StonehengeP4.pp2
ToppledStones.pp2
ToppledStonesP4.pp2
TripleArch.pp2
TripleArchP4.pp2
Arch1.rsr
Arch1P4.rsr
Arch2.rsr
Arch2P4.rsr
Arch3.rsr
Arch3P4.rsr
Arch4.rsr
Arch4P4.rsr
GroundCircle.rsr
InnerCircle.rsr
InnerCircleP4.rsr
OuterCircleFull.rsr
OuterCircleFullP4.rsr
OuterCircleMain.rsr
OuterCircleMainP4.rsr
Rocks.rsr
RocksP4.rsr
Ruins.rsr
RuinsP4.rsr
StandingRock1.rsr
StandingRock1P4.rsr
StandingRock2.rsr
StandingRock2P4.rsr
StandingRock3.rsr
StandingRock3P4.rsr
Stonehenge.rsr
StonehengeP4.rsr
ToppledStones.rsr
ToppledStonesP4.rsr
TripleArch.rsr
TripleArchP4.rsr

\Runtime\textures\

\Runtime\textures\DAZ\

\Runtime\textures\DAZ\Stonehenge

sh_grass.jpg
sh_grey_rock1.jpg
sh_grey_rock1_bmp.jpg
sh_grey_rock1_bmp1.jpg
shr_Bricks.jpg
shr_Buttresses.jpg
shr_Ring_trim.jpg
shr_Ruin_walls.jpg
shr_Stairs.jpg
shr_Stone_Arches.jpg

The Machine

image_medium.jpg

Product: The Machine
Product Code: br_sc022
DAZ Original: Yes
Created By: Rochr
Released: November 14, 2006

Product Information

  • Required Products: Bryce 5 or higher.
  • You can find new presets/files for Bryce in the following folder(s):
    • Content:Rochr:TheMachine

Product Notes

  • To use the scene, do the following:
    • Navigate to the Content:Rochr:TheMachine folder and open the Machine01.br5 file in Bryce.
    • Choose File > Merge from the menu, select the Machine02.br5 file, and click on Open.
    • If you wish, save the merged scene file as one scene. The final file size will be around 129 MB.
    • If you save the merged scene file in Bryce 6, the final file size will be around 60 MB.

Support

Visit our site for further technical support questions or concerns: http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing

The Machine

\Content\Rochr\TheMachine\

Machine01.br5
Machine02.br5

Throne of the Dragon

image_medium.jpg

  • Product: Dragon Throne
  • Product Code: br_sc032b
  • DAZ Original: YES
  • Created By: Alan Armstrong
  • Released: March 30, 2008

Product Information

Required Products: Bryce 6.1

You can find new presets/files for Bryce in the following folder(s):

  • Content:Alan Armstrong:Throne of the Dragon:Materials
  • Content:Alan Armstrong:Throne of the Dragon:Objects
  • Content:Alan Armstrong:Throne of the Dragon:Scene Files

View files installed for this product: ThroneOfTheDragonLIST.txt

Product Notes

For even more versatility:

  • Both the Candelabra and the Torch can be un-grouped from their lights.
  • The Wall, Buttressed w/Door can be un-grouped from the door.

Resolved Issues

Known Issues

Support


Visit our site for further technical support questions or concerns:

http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777

FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File List

Throne of the Dragon
————————————————–
————————————————–
\Content\
————————————————–
————————————————–
\Content\Alan Armstrong\
————————————————–
————————————————–
\Content\Alan Armstrong\Throne of the Dragon\
————————————————–
————————————————–
\Content\Alan Armstrong\Throne of the Dragon\Material
————————————————–
Dragon Throne.mat
————————————————–
\Content\Alan Armstrong\Throne of the Dragon\Object
————————————————–
Dragon Throne 1.obp
Dragon Throne 2.obp
————————————————–
\Content\Alan Armstrong\Throne of the Dragon\Scene
————————————————–
DragonThroneConstructionSet.bmp
DragonThroneConstructionSet.br6

Trees for the Forest

image_medium.jpg

Product: Trees for the Forest
Product Code: br_ob008
DAZ Original: Yes
Created By: Vic Haynes Graphics
Released: May 22, 2005

Product Information

  • Required Products: BRYCE 6.1 or OTHER 3D PROGRAM.
  • You can find new presets/files for Bryce in the following folder(s):
    • Content:Vic Haynes Graphics:Trees for the Forest

Product Notes

  • Included in this package are 15 untextured obj
    tree models. To use, import them into Bryce or other 3D program, then

texture the leaves and trunks with textures you find in the program or import photobased textures and apply.

  • Bryce has several leaf and bark textures available that work well for these trees.
  • When importing into Bryce, the import may seem to hang at some point (usually around 75%), but wait it out and the import

will eventually start back up again.

  • Each tree consists of a “stem” and “leaves” mesh. Delete the leaves for a winter or dead tree or delete the stem to use the

leaves without the woody stem.

Support

Visit our site for further technical support questions or concerns: http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing

Trees for the Forest

\Content\Vic Haynes Graphics\Trees for the Forest\

aspen.obj
black_tupelo.obj
ca_black_oak.obj
cottonwood.obj
deserttree.obj
fanpalm.obj
fir1.obj
fir2.obj
lombardy_poplar.obj
ornamental_asparagus.obj
palm.obj
royal_fern.obj
shavegrass.obj
tamarak.obj
weeping_willow1.obj

Vlad Castle

image_medium.jpg

Product: Vlad Castle
Product Code: br_ob081b
DAZ Original: YES
Created By: Alan Armstrong
Released: March 3, 2008


Product Information

  • Required Products: Bryce 6.1

Product Notes

* Notes from the artist:
* You can find new icons for loading this product in the following Bryce folders:
* Content:Alan Armstrong:Vlad Castle:Objects

\\   * Content:Alan Armstrong:Vlad Castle:Materials  \\    * Content:Alan Armstrong:Vlad Castle:Scenes \\ 


* This set is designed as a Construction set.
* You can place the pieces in various combinations to achieve the look you want.


* You can use the Scene file either standalone or as a base to start from.
* To load the scene simply Click open and browse

to the scene file.
* To use the objects:
* If you haven't already done so add them to the browser.
* Open the

Object Browser.
* Click the Plus button and name your folder, or add it to an existing folder.
* Push the Import

button.
* Browse to Content:Alan Armstrong:Vlad Castle:Objects and add the .OBP files one at a time.
* Once you have the

objects in the Browser you can simply select the part you wish to add to your scene and position.
* Note that one of the Columns

(Column, Round with Turret Group) is designed so that you can remove the top and stack them.
* Continue adding pieces until you

achieve the look you want.
* To use the Materials:
* If you haven't already done so add them to the browser.
*

Open the Material Browser.
* Click the Plus button and name your folder, or add it to an existing folder.
* Push the

Import button.
* Browse to Content:Alan Armstrong:Vlad Castle:Materials and add the .MAT file.
* These Materials are

Procedural and can be applied to these objects or other objects.
* They would only need to be applied to the objects in this set

to restore it after changing the materials of components of this set.
* Experiment and have fun!

Resolved Issues

  • None

Known Issues

  • None

Support

Visit our site for further technical support questions or concerns:

http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing


——————————————————————————–
\Content\Alan Armstrong\Vlad Castle\Materials\
——————————————————————————–
Vlad Castle.mat
——————————————————————————–
\Content\Alan Armstrong\Vlad Castle\Objects\
——————————————————————————–
VladCastle1.obp
VladCastle2.obp
——————————————————————————–
\Content\Alan Armstrong\Vlad Castle\Scenes\
——————————————————————————–
VladConstructionSet.bmp
VladConstructionSet.br6

Warhead

image_medium.jpg
Product: Warhead
Product Code: br_ob077
DAZ Original: YES
Created By: Phillip Drawbridge
Released: August 7, 2007

Product Notes

Required Products: Bryce 6.1
You can find new presets/files for Bryce in the following folder(s):

  • Content:Phillip Drawbridge:Warhead:Objects

View files installed for this product: file_listing

Support

Visit our site site for further technical support questions or concerns: www.daz3d.com/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787

TOLL-FREE 1-800-267-5170

File Listing

Warhead


\Content\



\Content\Phillip Drawbridge\



\Content\Phillip Drawbridge\Warhead\



\Content\Phillip Drawbridge\Warhead\Objects\


warhead.obp

Winter in the Lake

image_medium.jpg

  • Product Code: br_sc021
  • DAZ Original: YES
  • Created By: Estevez
  • Released: November 9, 2006

Product Information

Required Products: Bryce 5 or above

You can find new presets/files for Bryce in the following folder(s):

  • Content:Estevez:Winter in the Lake

View files installed for this product: WinterInLake_LIST

Product Notes

Because of the file size of this scene, it was split into five scenes to allow for smaller downloads. To use the scene, do the following:

  • Navigate to the Content:Estevez:Winter in the Lake folder and open the Winter_in_the_Lake01.br5 file
  • Choose File > Merge from the menu
  • Locate the Winter_in_the_Lake02.br5 file and click on Open
  • Repeat for Winter_in_the_Lake03.br5 through Winter_in_the_Lake05.br5 files
  • If you wish, save the merged scene files just remember that the final file size is around 150 MB
  • Saving the scene file is Bryce 6 format will bring the final file size down to around 95 MB

Resolved Issues

Known Issues

Support


Visit our site for further technical support questions or concerns:

http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777

FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File List

\Content\
—————————————————————————
—————————————————————————
\Content\Estevez\
—————————————————————————
—————————————————————————
\Content\Estevez\Winter in the Lake\
—————————————————————————
Winter_in_the_Lake01.br5
Winter_in_the_Lake02.br5
Winter_in_the_Lake03.br5
Winter_in_the_Lake04.br5
Winter_in_the_Lake05.br5

Xfrog Plant Sampler 1

image_medium.jpg

Product: X-Frog Trees Pack 1
Product Code: br_ob017
DAZ Original: YES
Created By: Greenworks
Released: September 16, 2005


Product Information

  • Required Products: BRYCE 5.5

Product Notes

* Notes from the artist:
* You can find new presets/files for Bryce in the following folder(s):
* Content:Greenworks:Bryce
*

Content:Greenworks:X-Frog


* To use these trees:
* Open Bryce and access the Objects Library
* Select the library to import the trees into and

click on Import
* Locate the folder listed above, select the first OBP file and click on Open
* Repeat for the remaining

items

Resolved Issues

  • None

Known Issues

  • None

Support

Visit our site for further technical support questions or concerns:

http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing


—————————————————————————————————-
\Content\Greenworks\Bryce\AL07_Fagus_sylvatica_European_Beech\
—————————————————————————————————-
AL07a.obp
AL07m.obp
AL07y.obp
—————————————————————————————————-
\Content\Greenworks\Bryce\BL09_Picea_abies_Norway_Spruce\
—————————————————————————————————-
BL09a.obp
BL09m.obp
BL09y.obp
—————————————————————————————————-
\Content\Greenworks\Bryce\BN07_Ficus_carica_Fig_Tree\
—————————————————————————————————-
BN07a.obp
BN07b.obp
BN07c.obp
—————————————————————————————————-
\Content\Greenworks\Bryce\BS19_Prunus_x_yedoensis_Yoshino_Cherry\
—————————————————————————————————-
BS19a.obp
BS19m.obp
BS19y.obp
—————————————————————————————————-
\Content\Greenworks\Bryce\CL11_Pinus_contorta_Lodgepole_Pine\
—————————————————————————————————-
CL11a.obp
CL11m.obp
CL11y.obp
—————————————————————————————————-
\Content\Greenworks\Bryce\EA15_Rhus_typhina_Staghorn_Sumac\
—————————————————————————————————-
EA15a.obp
EA15m.obp
EA15y.obp
—————————————————————————————————-
\Content\Greenworks\Bryce\EU03_Acer_opalus_Italian_Maple\
—————————————————————————————————-
EU03a.obp
EU03m.obp
EU03y.obp
—————————————————————————————————-
\Content\Greenworks\X-Frog\AL07_Fagus_sylvatica_European_Beech\
—————————————————————————————————-
AL07aut.tif
AL07aut_a.tif
AL07aut2.tif
AL07aut2_a.tif
AL07brk1.tif
AL07brk1_b.tif
AL07brk2.tif
AL07brk2_b.tif
AL07bud.tif
AL07bud_b.tif
OMruler.tif
AL07a.xfr
AL07m.xfr
AL07y.xfr
—————————————————————————————————-
\Content\Greenworks\X-Frog\BL09_Picea_abies_Norway_Spruce\
—————————————————————————————————-
BL09brk1.tif
BL09brk2.tif
BL09ned1.tif
BL09ned1_a.tif
BL09ned2.tif
BL09ned2_a.tif
BL09ned3.tif
BL09ned3_a.tif
BL09ned4.tif
BL09ned4_a.tif
OMruler.tif
BL09a.xfr
BL09m.xfr
BL09y.xfr
—————————————————————————————————-
\Content\Greenworks\X-Frog\BN07_Ficus_carica_Fig_Tree\
—————————————————————————————————-
1Mruler.tif
BN07brk.tif
BN07gnd1.tif
BN07gnd2.tif
BN07gnd3.tif
BN07lef.tif
BN07vas1.tif
BN07vas2.tif
BN07vas3.tif
OMruler.tif
BN07a.xfr
BN07b.xfr
BN07c.xfr
—————————————————————————————————-
\Content\Greenworks\X-Frog\BS19_Prunus_x_yedoensis_Yoshino_Cherry\
—————————————————————————————————-
BS19brk.tif
BS19brk_b.tif
BS19flo1.tif
BS19flo1_a.tif
BS19flo2.tif
BS19flo2_a.tif
OMruler.tif
BS19a.xfr
BS19m.xfr
BS19y.xfr
—————————————————————————————————-
\Content\Greenworks\X-Frog\CL11_Pinus_contorta_Lodgepole_Pine\
—————————————————————————————————-
CL11brk.tif
CL11brk_b.tif
CL11frt.tif
CL11frt_b.tif
CL11ned.tif
CL11ned_a.tif
OMruler.tif
CL11a.xfr
CL11m.xfr
CL11y.xfr
—————————————————————————————————-
\Content\Greenworks\X-Frog\EA15_Rhus_typhina_Staghorn_Sumac\
—————————————————————————————————-
EA15aut.tif
EA15brk.tif
OMruler.tif
EA15a.xfr
EA15m.xfr
EA15y.xfr
—————————————————————————————————-
\Content\Greenworks\X-Frog\EU03_Acer_opalus_Italian_Maple\
—————————————————————————————————-
EU03brk.tif
EU03brk_b.tif
EU03lef.tif
EU03lef_a.tif
OMruler.tif
EU03a.xfr
EU03m.xfr
EU03y.xfr

Xfrog Plant Sampler 2

image_medium.jpg

Product: X-Frog Trees Pack 2
Product Code: br_ob018
DAZ Original: YES
Created By: Greenworks
Released: September 17, 2005


Product Information

  • Required Products: BRYCE 5.5

Product Notes

* Notes from the artist:
* You can find new presets/files for Bryce in the following folder(s):
* Content:Greenworks:Bryce
*

Content:Greenworks:X-Frog


* To use these trees:
* Open Bryce and access the Objects Library
* Select the library to import the trees into and

click on Import
* Locate the folder listed above, select the first OBP file and click on Open
* Repeat for the remaining

items

Resolved Issues

  • None

Known Issues

  • None

Support

Visit our site for further technical support questions or concerns:

http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing


—————————————————————————————————-
\Content\Greenworks\Bryce\EU36_Pinus_mugo_Mugo_Pine\
—————————————————————————————————-
EU36a.obp
EU36m.obp
EU36y.obp
—————————————————————————————————-
\Content\Greenworks\Bryce\FL13_Pelargonium_grandiflorum_Geranium\
—————————————————————————————————-
FL13_1.obp
FL13_2.obp
FL13_3.obp
—————————————————————————————————-
\Content\Greenworks\Bryce\FL30_Eustoma_grandiflorum_Lisianthus\
—————————————————————————————————-
FL30_1.obp
FL30_2.obp
FL30_3.obp
—————————————————————————————————-
\Content\Greenworks\Bryce\FR01_Carica_papaya_Papaya\
—————————————————————————————————-
FR01a.obp
FR01m.obp
FR01y.obp
—————————————————————————————————-
\Content\Greenworks\Bryce\GC14_Poa_annua_Annual_Blue_Grass\
—————————————————————————————————-
GC14_1.obp
GC14_2.obp
GC14_3.obp
—————————————————————————————————-
\Content\Greenworks\Bryce\HP04_Codiaeum_ var_Iegatum_var_Pictum_Croton_Petra\
—————————————————————————————————-
Hp04_1.obp
Hp04_2.obp
Hp04_3.obp
—————————————————————————————————-
\Content\Greenworks\Bryce\JA15_Picea_koyamai_Koyama_Spruce\
—————————————————————————————————-
JA15a.obp
JA15m.obp
JA15y.obp
—————————————————————————————————-
\Content\Greenworks\X-Frog\EU36_Pinus_mugo_Mugo_Pine\
—————————————————————————————————-
EU36brk.tif
EU36brk_b.tif
EU36ned.tif
EU36ned_a.tif
EU36ned_illu.tif
OMruler.tif
EU36a.xfr
EU36m.xfr
EU36y.xfr
—————————————————————————————————-
\Content\Greenworks\X-Frog\FL13_Pelargonium_grandiflorum_Geranium\
—————————————————————————————————-
FL13lef1.tif
FL13lef1_a.tif
FL13lef2.tif
FL13lef2_a.tif
FL13lef3.tif
FL13lef3_a.tif
FL13lef4.tif
FL13lef4_a.tif
FL13lef5.tif
FL13lef5_a.tif
FL13pet1.tif
FL13pet1_a.tif
FL13pet2.tif
FL13pet2_a.tif
FL13pet3.tif
FL13pet3_a.tif
FL13stm.tif
FL13stm_b.tif
OMruler.tif
FL13_1.xfr
FL13_2.xfr
FL13_3.xfr
—————————————————————————————————-
\Content\Greenworks\X-Frog\FL30_Eustoma_grandiflorum_Lisianthus\
—————————————————————————————————-
FL30cnt1.tif
FL30cnt1_b.tif
FL30cnt2.tif
FL30cnt2_b.tif
FL30flo1.tif
FL30flo2.tif
FL30flo3.tif
FL30lef1.tif
FL30lef1_a.tif
FL30lef2.tif
FL30lef2_a.tif
FL30pet1.tif
FL30pet1_a.tif
FL30pis.tif
FL30sta.tif
FL30sta_b.tif
FL30stm1.tif
FL30stm1_b.tif
FL30stm2.tif
FL30stm2_b.tif
OMruler.tif
FL30_1.xfr
FL30_2.xfr
FL30_3.xfr
—————————————————————————————————-
\Content\Greenworks\X-Frog\FR01_Carica_papaya_Papaya\
—————————————————————————————————-
1MRuler.tif
circle.tif
FR01brk1.tif
FR01brk2.tif
FR01brk3.tif
FR01flo.tif
FR01flo_a.tif
FR01flo2.tif
FR01frt.tif
FR01frt2.tif
FR01lef.tif
FR01lef_a.tif
OMruler.tif
FR01a.xfr
FR01m.xfr
FR01y.xfr
—————————————————————————————————-
\Content\Greenworks\X-Frog\GC14_Poa_annua_Annual_Blue_Grass\
—————————————————————————————————-
1Mruler.tif
GC14lef.tif
GC14lef_a.tif
GC14pet.tif
GC14pet_a.tif
GC14stm.tif
GC14stm_b.tif
OMruler.tif
GC14_1.xfr
GC14_2.xfr
GC14_3.xfr
—————————————————————————————————-
\Content\Greenworks\X-Frog\HP04_Codiaeum_ var_Iegatum_var_Pictum_Croton_Petra\
—————————————————————————————————-
HP04drt.tif
HP04drt_b.tif
HP04lef1.tif
HP04lef1_a.tif
HP04lef2.tif
HP04lef2_a.tif
HP04pot1.tif
HP04pot1_b.tif
HP04pot2.tif
HP04pot2_b.tif
HP04stm1.tif
HP04stm1_b.tif
HP04stm2.tif
HP04stm2_b.tif
OMruler.tif
HP04_1.xfr
HP04_2.xfr
HP04_3.xfr
—————————————————————————————————-
\Content\Greenworks\X-Frog\JA15_Picea_koyamai_Koyama_Spruce\
—————————————————————————————————-
JA15brk.tif
JA15brk_b.tif
JA15frt.tif
JA15frt_b.tif
JA15ned.tif
JA15ned_a.tif
OMruler.tif
JA15a.xfr
JA15m.xfr
JA15y.xfr

Xfrog Plant Sampler 3

image_medium.jpg

Product: X-Frog Trees Pack 3
Product Code: br_ob019
DAZ Original: YES
Created By: Greenworks
Released: September 17, 2005


Product Information

  • Required Products: BRYCE 5.5

Product Notes

* Notes from the artist:
* You can find new presets/files for Bryce in the following folder(s):
* Content:Greenworks:Bryce
*

Content:Greenworks:X-Frog


* To use these trees:
* Open Bryce and access the Objects Library
* Select the library to import the trees into and

click on Import
* Locate the folder listed above, select the first OBP file and click on Open
* Repeat for the remaining

items

Resolved Issues

  • None

Known Issues

  • None

Support

Visit our site for further technical support questions or concerns:

http://www.daz3d.com/i.x/support

Thank you and enjoy your new products!

DAZ Productions Technical Support
12637 South 265 West #300
Draper, UT 84020
Phone:(801) 495-1777
FAX:(801) 495-1787
TOLL-FREE 1-800-267-5170

File Listing


—————————————————————————————————-
\Content\Greenworks\Bryce\ML07_Juniperus_oxycedrus_ssp_macrocarpa_Prickly_Juniper\
—————————————————————————————————-
ML07a.obp
ML07m.obp
ML07y.obp
—————————————————————————————————-
\Content\Greenworks\Bryce\PR09_Cycadeoidea_gigantea\
—————————————————————————————————-
PR09a.obp
PR09m.obp
PR09y.obp
—————————————————————————————————-
\Content\Greenworks\Bryce\SW15_Opuntia_engelmannii_Prickly_Pear\
—————————————————————————————————-
SW15_1.obp
SW15_2.obp
SW15_3.obp
—————————————————————————————————-
\Content\Greenworks\Bryce\RS18_Siphonochalina_siphonella_Colony_Siphon_Sponge\
—————————————————————————————————-
RS18v1.obp
RS18v2.obp
RS18v3.obp
—————————————————————————————————-
\Content\Greenworks\Bryce\SH09_Ligustrum_vulgare_Common_Privet\
—————————————————————————————————-
SH09_1.obp
SH09_2.obp
SH09_3.obp
—————————————————————————————————-
\Content\Greenworks\Bryce\TR02_Archontophoenix_alexandrae_King_Palm\
—————————————————————————————————-
TR02a.obp
TR02m.obp
TR02y.obp
—————————————————————————————————-
\Content\Greenworks\Bryce\WE04_Calocedrus_decurrens_Incense_Cedar\
—————————————————————————————————-
WE04a.obp
WE04m.obp
WE04y.obp
—————————————————————————————————-
\Content\Greenworks\X-Frog\ML07_Juniperus_oxycedrus_ssp_macrocarpa_Prickly_Juniper\
—————————————————————————————————-
ML07brk.tif
ML07brk_b.tif
ML07ned.tif
ML07ned_a.tif
OMruler.tif
ML07a.xfr
ML07m.xfr
ML07y.xfr
—————————————————————————————————-
\Content\Greenworks\X-Frog\PR09_Cycadeoidea_gigantea\
—————————————————————————————————-
OMruler.tif
PR09bra.tif
PR09brk.tif
PR09brk2.tif
PR09cnt.tif
PR09lef.tif
PR09ste.tif
PR09a.xfr
PR09m.xfr
PR09y.xfr
—————————————————————————————————-
\Content\Greenworks\X-Frog\RS18_Siphonochalina_siphonella_Colony_Siphon_Sponge\
—————————————————————————————————-
circle.tif
OMruler.tif
Real.tif
RS18bod.tif
RS18bod_b.tif
RS18tip.tif
RS18tip_b.tif
RS18tip2.tif
RS18tip2_b.tif
RS18v1.xfr
RS18v2.xfr
RS18v3.xfr
—————————————————————————————————-
\Content\Greenworks\X-Frog\SH09_Ligustrum_vulgare_Common_Privet\
—————————————————————————————————-
OMruler.tif
Real.tif
SH09brk1.tif
SH09brk1_b.tif
SH09brk2.tif
SH09brk2_b.tif
SH09lef.tif
SH09lef_a.tif
SH09_1.xfr
SH09_2.xfr
SH09_3.xfr
—————————————————————————————————-
\Content\Greenworks\X-Frog\SW15_Opuntia_engelmannii_Prickly_Pear\
—————————————————————————————————-
OMruler.tif
SW15frt.tif
SW15frt_b.tif
SW15pet1.tif
SW15pet1_a.tif
SW15pet2.tif
SW15pet2_a.tif
SW15sta.tif
SW15sta_a.tif
SW15stm1.tif
SW15stm1_b.tif
SW15stm2.tif
SW15stm2_b.tif
SW15stm3.tif
SW15stm3_b.tif
SW15trn1.tif
SW15trn1_b.tif
SW15_1.xfr
SW15_2.xfr
SW15_3.xfr
—————————————————————————————————-
\Content\Greenworks\X-Frog\TR02_Archontophoenix_alexandrae_King_Palm\
—————————————————————————————————-
1MRuler.tif
circle.tif
OMruler.tif
TR02brk1.tif
TR02brk1_b.tif
TR02brk2.tif
TR02brk2_b.tif
TR02brk3.tif
TR02brk3_b.tif
TR02lef1.tif
TR02lef1_a.tif
TR02lef2.tif
TR02lef2_a.tif
TR02a.xfr
TR02m.xfr
TR02y.xfr
—————————————————————————————————-
\Content\Greenworks\X-Frog\WE04_Calocedrus_decurrens_Incense_Cedar\
—————————————————————————————————-
OMruler.tif
WE04brk.tif
WE04brk_b.tif
WE04ned.tif
WE04ned_a.tif
WE04a.xfr
WE04m.xfr
WE04y.xfr