User Tools

Site Tools


dForce Queen of Thorns Outfit for Genesis 8 Female

Click for original

Product Name: dForce Queen of Thorns Outfit for Genesis 8 Female
Product ID: 69053
Published Artist(s): Arki, Shox-Design
Created By: N/A
Release Date: 2020-04-17

Product Information

  • Required Products: None

The dForce Queen of Thorns Outfit is a historically inspired fantasy outfit with its very own unique look.

To allow for versatility, several pieces like the skirts have been rigged with individual bones. They allow for maximum control and easy handling before and after dForce simulations, and numerous morphs have been built into the outfit pieces to allow for a further variety of looks, completed by specialized hide and show options which can give pieces like the corset a completely new look.

To get you started, wearable presets have been provided which allow easy loading of multiple outfit pieces at once. Hierarchical material presets make loading the included eight material sets available through a single click.

The dForce Queen of Thorns Outfit is perfect for your fantastic heroine, historically inspired damsel or evil and mysterious sorceress!

Product Notes

Installation Packages

Below is a list of the installation package types provided by this product. The name of each package contains a Package Qualifier (WIP), which is used as a key to indicate something about the contents of that package.

  • 1 Core 1)

[ ] = Optional, depending on target application(s)

Not all installation packages provide files that are displayed to the user within the interface of an application. The packages listed below, do. The application(s), and the location(s) within each application, are shown below.

dForce Queen of Thorns Outfit Addon for Genesis 8 Female (Core)

  • You can find new icons for loading this product in the following DAZ Studio Folders:
    • “People:Genesis 8 Female:Clothing:Arki”
    • “People:Genesis 8 Female:Clothing:Arki:Queen of Thorns”
    • “People:Genesis 8 Female:Clothing:Arki:Queen of Thorns:Materials:Iray:Arki”
    • “People:Genesis 8 Female:Clothing:Arki:Queen of Thorns:Materials:Iray:Arki:Gems”
    • “People:Genesis 8 Female:Clothing:Arki:Queen of Thorns:Materials:Iray:Arki:Pantiehose”
    • “People:Genesis 8 Female:Clothing:Arki:Queen of Thorns:Materials:Iray:Arki:Petals”
    • “People:Genesis 8 Female:Clothing:Arki:Queen of Thorns:Materials:Iray:Shox-Design”
    • “People:Genesis 8 Female:Clothing:Arki:Queen of Thorns:Materials:Iray:Shox-Design:Gems”
    • “People:Genesis 8 Female:Clothing:Arki:Queen of Thorns:Materials:Iray:Shox-Design:Pantyhose”
    • “People:Genesis 8 Female:Clothing:Arki:Queen of Thorns:Materials:Iray:Shox-Design:Petals”
    • “People:Genesis 8 Female:Clothing:Arki:Queen of Thorns:Utilities”
  • You can find new icons for this product in the following DAZ Studio Categories:
    • “Accessories:Neck”
    • “Documents”
    • “Materials:Iray:Wardrobe”
    • “Shaders:Iray:Gemstone”
    • “Shaders:Iray:Vegetation”
    • “Utilities:Fabric Settings”
    • “Wardrobe:Headwear”
    • “Wardrobe:Outerwear:Bottoms”
    • “Wardrobe:Outerwear:Tops”
    • “Wardrobe:Outfits”
    • “Wardrobe:Underwear:Bottoms”

Additional Details

  • Short Instructions for the Queen of Thorns Outfit
    • General Morph Types
      • The outfit parts of this product load with a selection of morphs and control dials for the dress designed to help you with fitting it. The morph categories are as follows:
        • • Adjustments: Alter shape and fit of a piece.
        • • Styles: Contains shaping morphs which are designed to allow you to use mulitple outfit pieces together.
      • • Controls: Controls movement and size of the separate dress parts.
      • Please note that several outfit parts load with some morphs already dialed in. This applies for the wearable presets which already have their drape morphs activated.
  • The Queen of Thorns Outfit and dForce
    • How to work with the Queen of Thorns Outfit and dForce (wearable presets only)
      • This method works best for simple standing poses.
        • If you want to set up a dForce simulation, please take the following steps:
          • 1. Load G8F into your scene; also load a plane primitive into your scene to act as a collision object for the floor
          • 2. Apply your chosen wearable preset to G8F with the dForce compliant outfit
          • 3. Set up an animation with 61 frames (you can raise this value if you want the piece or pieces to settle and drape fully)
          • 4. In frame 1, set a keyframe (click on the little key icon with the plus symbol inside, to the far right end of the bottom icon bar) with Genesis in default pose and your freshly loaded simulation ready wearables preset
          • 5. Go to frame 25, select a pose for Genesis, then add a new keyframe in pose 25
          • 6. Go to the Simulation tab inside DAZ Studio and change the following default settings: Start Bones from Memorized Pose - OFF, Frames To Simulate: Animated (Use Timeline Play Range), Collision Mesh Resolution: Base
          • 7. Hit the “Simulate” Button!
    • How to work with the Queen of Thorns Outfit and dForce
      • This method works best for more challenging poses.
        • If you want to set up a dForce simulation NOT using the wearable presets, please take the following steps:
          • 1. Load G8F into your scene; also load a plane primitive into your scene to act as a collision object for the floor
          • 2. Apply your chosen outfit piece to G8F; please note that the some of the longer pieces like the skirts might interesect with the floor. To be sure it will not get stuck in the floor, you might want to lift the figure above floor level in frame 1 to avoid intersections!
          • 3. Set up an animation with 61 frames (you can raise this value if you want the piece or pieces to settle and drape fully)
          • 4. In frame 1, set a keyframe (click on the little key icon with the plus symbol inside, to the far right end of the bottom icon bar) with Genesis in default pose and your freshly loaded simulation ready wearables preset
          • 5. Go to frame 25, select a pose for Genesis, then add a new keyframe in pose 25
          • 6. Go to the Simulation tab inside DAZ Studio and change the following default settings: Start Bones from Memorized Pose - OFF, Frames To Simulate: Animated (Use Timeline Play Range), Collision Mesh Resolution: Base
          • 7. Hit the “Simulate” Button!
  • For some scenes you can try to reduce the Air Resistance values in the simulation settings (Simulation Settings tab, Enironment Settings). This will help prevent ballooning of the simulated parts and will also help them to settle on the figure earlier.
  • Customizations
    • Some of the different configurations for this outfit use the different options to show/hide parts of several pieces. You can find these options in each of these mentioned outfit pieces in your parameters tab under General/Hide-Show.
    • To reset each of the pieces to their default state, please use the included utilities found under People/Genesis 8 Female/Clothing/Arki/Queen of Thorns/Utilities.

Resolved Issues

  • None

Known Issues

  • None

Support

Visit our site for technical support questions or concerns.

1)
The contents of this package are in DAZ Studio Native formats